Vinyling roof rails
#1
Lead Lap
Thread Starter
Vinyling roof rails
Should i pop them off and vinyl them separately?
or
Vinyl over them with the same main piece of vinyl, then heat up the inner seems and run a credit card along the inner seams to conform?
figured id ask before i ruin a $100 sheet of vinyl. i would prefer the second method, of course, but would like to hear from those that have experienced this first hand.
Thanks.
or
Vinyl over them with the same main piece of vinyl, then heat up the inner seems and run a credit card along the inner seams to conform?
figured id ask before i ruin a $100 sheet of vinyl. i would prefer the second method, of course, but would like to hear from those that have experienced this first hand.
Thanks.
#3
Lead Lap
Thread Starter
because they are delicate and prone to break. and i will only have slivers of vinyl left to work with. dealing with a vinyl piece that is 1" wide and 5'-0" long sounds like a nightmare of patience.
Trending Topics
#8
Lead Lap
Thread Starter
just bought a 4x6 sheet of avery gloss black vinyl. i fiddled with the rails and they seem way to flimsy to vinyl by themselves.
i will attempt to vinyl everything in one shot tomorrow. if it doesnt come out well, then ill just cut along the inside of the rails and leave them as is.
i will attempt to vinyl everything in one shot tomorrow. if it doesnt come out well, then ill just cut along the inside of the rails and leave them as is.
Thread
Thread Starter
Forum
Replies
Last Post