IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

HID Ballast OEM Not Working

Thread Tools
 
Search this Thread
 
Old 05-12-11, 07:35 PM
  #1  
MiamiIS350
Driver
Thread Starter
 
MiamiIS350's Avatar
 
Join Date: Feb 2008
Location: FL
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default HID Ballast OEM Not Working

My driver side HID Ballast OEM has not been working for a while now, but I finally got time to try out some things.

Problem: The light turns on for a couple seconds and then goes out. If I keep on turning the lights on and off, the bulb will stay on for about 3-5 minutes before going out again and then I can turn the lights on and off again and it will stay on again for about 3-5 minutes.

Things that I have tried.
1) Changed out the bulb. Same issue.
2) Just today, tried another ballast and bulb. Same issue.
3) Only thing that I have not done is remove my passenger headlight and connect it to my driver side and see what happens. I will probably be doing that tomorrow.

I am at the point that if I don't fix it, I am going to throw the light off my balcony.

Any help from any master tech's is appreciated.

Any relays that I can check, or grounding points that I might be missing.
Old 05-12-11, 07:36 PM
  #2  
MiamiIS350
Driver
Thread Starter
 
MiamiIS350's Avatar
 
Join Date: Feb 2008
Location: FL
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default

In addition, I have searched all the threads here and none have been able to help me out as of yet.

No longer under warranty.
Old 05-12-11, 07:41 PM
  #3  
lexusis305
Lead Lap
iTrader: (2)
 
lexusis305's Avatar
 
Join Date: Sep 2010
Location: miami,fl
Posts: 723
Likes: 0
Received 2 Likes on 1 Post
Default

Yo pm I have a brand new drive side light
Old 05-12-11, 07:45 PM
  #4  
MiamiIS350
Driver
Thread Starter
 
MiamiIS350's Avatar
 
Join Date: Feb 2008
Location: FL
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default

How do you figure its my headlight? I tried a different ballast and bulb already. A new headlight won't do me any good, but maybe after tomorrow if I am end up breaking the **** out of frustration, I'll shoot you a PM.
Old 05-12-11, 08:25 PM
  #5  
A_Grasso
Lexus Test Driver
iTrader: (13)
 
A_Grasso's Avatar
 
Join Date: Aug 2009
Location: 626, SGV CA
Posts: 1,110
Received 1 Like on 1 Post
Default

I pretty much had the same problem. After ordering an oem ballast from ebay and installing it, my headlight now works flawlessly!
Old 05-13-11, 12:00 PM
  #6  
DreamerzCC
Pole Position
iTrader: (1)
 
DreamerzCC's Avatar
 
Join Date: Jan 2011
Location: AL
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
Default

Was there any condensation or water issues? if so you will have to remove the headlight housing and bake it and redo the wiring in the section underneath. modsexpress has a kit for like $16 to replace the wiring i think.....
Old 05-13-11, 01:08 PM
  #7  
A_Grasso
Lexus Test Driver
iTrader: (13)
 
A_Grasso's Avatar
 
Join Date: Aug 2009
Location: 626, SGV CA
Posts: 1,110
Received 1 Like on 1 Post
Default

^ it went out because of condensation. The wires were fine and no, you don't need to bake ur light
Old 05-13-11, 01:31 PM
  #8  
Vroomin350
Lexus Champion
iTrader: (28)
 
Vroomin350's Avatar
 
Join Date: Jan 2011
Location: SoFla
Posts: 4,265
Likes: 0
Received 1 Like on 1 Post
Default

I was going to suggest something as I had the same problem till I switched out and put in garax 6k, thankfully everything has been fine ever since. However I read your OP and saw that didnt work for you, good luck
Old 05-13-11, 09:58 PM
  #9  
MiamiIS350
Driver
Thread Starter
 
MiamiIS350's Avatar
 
Join Date: Feb 2008
Location: FL
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default

Figured it out. It was my ballast and my bulb. Had to bake my headlights to remove the old ballast. What a mission! Thank god its over.
Old 01-16-13, 10:29 AM
  #10  
emandel
Driver School Candidate
 
emandel's Avatar
 
Join Date: Jan 2013
Location: California
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

i'm having the exact problem that it goes on for about 2 to 3 minutes and turn's off. where did you buy your ballast and bulb? thanks
Old 01-17-13, 07:52 AM
  #11  
Buya02
Rookie
iTrader: (2)
 
Buya02's Avatar
 
Join Date: Jan 2010
Location: CA
Posts: 90
Received 6 Likes on 3 Posts
Default

I had the same issue it was my BULB. Replaced them with some aftermarket ones 6k (no name $60 bucks) and everything works fine now.
Old 01-17-13, 09:22 AM
  #12  
PureZ
Driver
 
PureZ's Avatar
 
Join Date: Jan 2007
Location: NJ
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Default

Im actually having a similar problem but reversed. My drivers light wont initially turn on but if I turn it on and off again it ignites. Does that mean I have to get a new ballast too?
Old 07-16-13, 11:42 AM
  #13  
Toxicxk23
Lead Lap
 
Toxicxk23's Avatar
 
Join Date: Apr 2012
Location: CA
Posts: 705
Received 3 Likes on 3 Posts
Default

Resurrecting an old thread but does anyone have part info on the OEM ballast? I have a 2007 IS350 and my passenger side ballast is out. I've been looking for info but can't seem to find any.
Old 08-09-13, 10:58 AM
  #14  
1FlexedLex
Rookie
 
1FlexedLex's Avatar
 
Join Date: Jun 2013
Location: Ny
Posts: 59
Received 1 Like on 1 Post
Default

^ as am i. 07 passenger side went out. i was thinking getting a D4S aftermarket kit with bulbs and a ballast.
Old 10-15-14, 07:59 AM
  #15  
skoota500
Rookie
 
skoota500's Avatar
 
Join Date: May 2014
Location: NC
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

Bringing back this old thread... Can anyone point me in the right direction for a ballast install? 07 is350

one headlight is not cool.


Quick Reply: HID Ballast OEM Not Working



All times are GMT -7. The time now is 02:33 PM.