Pics of my '06 IS250 with 2011MY headlights w/ LED Strip
#527
[quote=cyberscorp;7379646]
Negative. How can I take my car out with no headlights ? Plus I do not have my own garage to do all these things myself unfortunately.
I do not have a garage that's the main problem. I don't like to do everything in the open too.
Just my bad luck. Anyways I've decided never to give my car to the dealership for regular maintenance like oil change etc from now on. Pretty pissed with them for not supporting me with this.
Just my bad luck. Anyways I've decided never to give my car to the dealership for regular maintenance like oil change etc from now on. Pretty pissed with them for not supporting me with this.
#528
Driver School Candidate
Join Date: Aug 2012
Location: Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
always wondered if its been done. But i want to know if you can still keep the DRL's on the high beam and LED's or just the LED's as DRL's @ 50% then when the parking lights are switched on to then power them to 100%...Although 100% on DRL's would be nice as well.
#529
are you trying to get the leds to work when you turn the stalk on auto? i have been wondering that too
#531
#533
Driver School Candidate
Join Date: Aug 2010
Location: Sofia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I admire the work you've done on this project. I looked all over the Internet for that information and this is the only place I found it. Respect for that!
I have few questions. Did you go with the single MBR2545CT or you went with the 2 x 1N5817?
I read the whole thread and somewhere you mentioned that you might modify the harness that comes from the car instead of the one that comes from the headlights. Which approach did you choose?
Did you take any pictures by any chance? I can picture it myself in my head but I would like to see how you did it.
Thanks in advance.
#535
Lexus Champion
iTrader: (20)
ive been trying to pull out the green wire to relocate it but it's not coming out, what is the proper way? its basically to the point of ripping out and i hope i dont mess it up. i can't even get a hold of the rubber part to pull it out, what should i do? i pulled out the brown plug already but the green wire wont' come out. here is a pic
also my headlights didn't come with a plug like another member of this thread. will my old HID headlights have this to plug it in? do i need this harness? thanks.
also my headlights didn't come with a plug like another member of this thread. will my old HID headlights have this to plug it in? do i need this harness? thanks.
Last edited by ISFPOWER; 10-28-12 at 11:53 PM.
#537
Lexus Champion
iTrader: (20)
^^ i meant the little 3 prong harness. i think you were talking about the the cover cap, which i think i just reuse from the ones on my car. im just trying to get ready for hte install tomorrow.
#539
Pole Position
iTrader: (13)
ive been trying to pull out the green wire to relocate it but it's not coming out, what is the proper way? its basically to the point of ripping out and i hope i dont mess it up. i can't even get a hold of the rubber part to pull it out, what should i do? i pulled out the brown plug already but the green wire wont' come out. here is a pic
also my headlights didn't come with a plug like another member of this thread. will my old HID headlights have this to plug it in? do i need this harness? thanks.
also my headlights didn't come with a plug like another member of this thread. will my old HID headlights have this to plug it in? do i need this harness? thanks.
#540
Lexus Champion
iTrader: (20)
yes i do plan to run 100% full bright. is this the same on the ISF?