IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Will those Wheels Fit an IS250 AWD - Part Uno

Old 06-22-11, 11:03 PM
  #61  
Sh0gunkid
Rookie
iTrader: (1)
 
Sh0gunkid's Avatar
 
Join Date: Nov 2007
Location: NJ
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default

Quick question. I plan on getting BC coils and dropping about 1.5". I don't want to run staggered but was thinking of running
F - 19x9__40mm offset__tire 235/35/19
R - 19x9__34mm offset__tire 235/35/19

I wouldn't need to adjust my fenders with this would I? Would this be the most aggressive non staggered setup without altering fenders? Any help would be appreciated.
Old 06-22-11, 11:38 PM
  #62  
JoshIS408
- - G T V I P - -
iTrader: (11)
 
JoshIS408's Avatar
 
Join Date: Jul 2009
Location: Bay Area CA
Posts: 4,680
Received 117 Likes on 44 Posts
Default

^ you wont need any fender mods very non aggressive setup
Old 06-29-11, 06:22 PM
  #63  
ltzSupra
Driver
 
ltzSupra's Avatar
 
Join Date: Dec 2009
Location: NY
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Default

19x9.5 +22 19x10.5 +22...question is how low can I go before it starts rubbing/need fender mods? (Megan EZ)
Old 07-01-11, 08:41 PM
  #64  
LexoticJ
Racer
iTrader: (5)
 
LexoticJ's Avatar
 
Join Date: May 2011
Location: GA
Posts: 1,352
Received 96 Likes on 43 Posts
Talking Vertini 20s

ok so im going to go with 20s on the Lex and wanted to know if these will fit and which will be the best setup

2007 is250

Vertini Wheels: Fairlady (Black W/Machine Face) - 20x9.5 inch wheel
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x10.5 inch wheel
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x10 inch wheel

the pics attached are of the wheels and one on someones IS but I have no clue what setup they ran... can someone assist me with this
Attached Thumbnails Will those Wheels Fit an IS250 AWD - Part Uno-fairlady-apr2-2011_-2-.jpg   Will those Wheels Fit an IS250 AWD - Part Uno-fairlady-apr2-2011_-3-.jpg   Will those Wheels Fit an IS250 AWD - Part Uno-vertiniconv005.jpg  
Old 07-06-11, 08:59 PM
  #65  
my1stis
Driver School Candidate
 
my1stis's Avatar
 
Join Date: Jul 2011
Location: NY
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi everyone, I'm new to this forum and a new IS250 awd owner so please take it easy on me. Currently running 17" stock wheels and tires. Would like to know if 2011 IS350 stock wheels and tires will fit my car. Wheels on the IS350 is 18x8 and 18x8.5. The tires are 225/40 and 255/40.

Wondering if running these would mess up the AWD system. Any help would be much appreciated. Thanks!
Old 07-06-11, 10:00 PM
  #66  
sw1tched
Rookie
 
sw1tched's Avatar
 
Join Date: May 2011
Location: Nebraska
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

that wont work well. keep the tire height the same front to back. your back tires would be larger than your fronts.
Old 07-11-11, 05:08 AM
  #67  
sw1tched
Rookie
 
sw1tched's Avatar
 
Join Date: May 2011
Location: Nebraska
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

OP add my setup to the list please.

20 x 8.5 (38 offset)
235 / 30 / 20 tires

Stock suspension.
Old 07-27-11, 10:46 PM
  #68  
MonsterIS
Rookie
 
MonsterIS's Avatar
 
Join Date: Jun 2011
Location: WI
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
Default

hey guys, new to this "wheel/rims" stuff. I was wondering, whats the difference between the 4x100 bolt and 5x100? could the 4x100 fit on the 06 is250?
Old 07-27-11, 11:31 PM
  #69  
laobo979
Lead Lap
iTrader: (5)
 
laobo979's Avatar
 
Join Date: Mar 2008
Location: Mass
Posts: 3,525
Received 66 Likes on 47 Posts
Default

Difference is there an extra hole for the 5th wheel stud. No you can't put a 4lug rim on a 5lug car. Plus for the Lexus pattern it's a 5x114.3.
Old 07-27-11, 11:57 PM
  #70  
soleeasii
Pole Position
iTrader: (10)
 
soleeasii's Avatar
 
Join Date: Jun 2009
Location: VA
Posts: 389
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by sleekbrian
Front-19x8.5 +30 with 235/35/19
Rear-19x10 +38 with 275/30/19

I know this setup will work, but if i lower it with BCR coils for a conservative drop nothing crazy will i rub or need to roll my fenders?
I'm slammed on BC Coils!! I run 19x8.5 and 19x10, 235-35-19, 265-30-19.. NO Problems xcept that I burn thru tires QUICKLY!! I strongly suggest investing in a camber kit!!
Old 07-28-11, 12:51 PM
  #71  
MonsterIS
Rookie
 
MonsterIS's Avatar
 
Join Date: Jun 2011
Location: WI
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by laobo979
Difference is there an extra hole for the 5th wheel stud. No you can't put a 4lug rim on a 5lug car. Plus for the Lexus pattern it's a 5x114.3.
so could the 5x100 fit on my car? or would i have to get an exact 5x114.3?
Old 07-28-11, 01:25 PM
  #72  
tedward88
Pole Position
iTrader: (11)
 
tedward88's Avatar
 
Join Date: Jul 2011
Location: CA (Norcal)
Posts: 329
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MonsterIS
so could the 5x100 fit on my car? or would i have to get an exact 5x114.3?
Exactly 5x114.3. The 5 is how many lugs and the 114.3 the distance between the lugs in mm
Old 07-28-11, 07:11 PM
  #73  
MonsterIS
Rookie
 
MonsterIS's Avatar
 
Join Date: Jun 2011
Location: WI
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
Default

^^ thanks for the info!!!
Old 07-28-11, 10:32 PM
  #74  
tes7815
Rookie
 
tes7815's Avatar
 
Join Date: Aug 2010
Location: WI
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

Heyy, So im looking to run

18x9.0 offset +25mm all around. Do you guys think that I need any fender mods. Anybody close to this set up have any pictures?
Old 07-29-11, 09:20 PM
  #75  
MonsterIS
Rookie
 
MonsterIS's Avatar
 
Join Date: Jun 2011
Location: WI
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
Default

^^ im wondering the same....!!

Thread Tools
Search this Thread
Quick Reply: Will those Wheels Fit an IS250 AWD - Part Uno



All times are GMT -7. The time now is 01:37 PM.