Will those Wheels Fit an IS250 AWD - Part Uno
#17
HAHA
It's photoshopped, you take 2 pictures on a tripod, one with the hood down and one with it up and you layer them on top of each other. Then you get rid of everything in the hood up picture cept the engine bay.
It's photoshopped, you take 2 pictures on a tripod, one with the hood down and one with it up and you layer them on top of each other. Then you get rid of everything in the hood up picture cept the engine bay.
#19
Rookie
Thread Starter
Guess that did not work....
#22
i'm running F 19x8.5+35 235/35/19 and R 19x10 +45 265/30/19, my car vibrates when rolling around 20-40km then smooths out till 120km . i'm only feeling the vibrate coming from the front. I also had an alignment done after the wheels were installed and i still feel the front shake still. Do i need to change to a different tire setup to fix this? thanks
#24
Driver School Candidate
Join Date: Jul 2010
Location: Maryland
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I have a IS250 AWD and I wanted to put the vossen vvs-086. I was told at a shop that 20x9 in the front and 20x10.5 in the rear is possible for my AWD IS250. The tires to run that is 245-30-20 in the front, and 285-25-20 in the rear.
With some magical tire calculation this guy gave me at a shop said, "there would be 25.78 in the front, and 25.61 in the rear, leaving .17 different." ??? I don't understand?
So can i run this staggered setup with out messing up my car. I heard other wise.
It would be awesome if I could stager with these rims I want!!!!!!
With some magical tire calculation this guy gave me at a shop said, "there would be 25.78 in the front, and 25.61 in the rear, leaving .17 different." ??? I don't understand?
So can i run this staggered setup with out messing up my car. I heard other wise.
It would be awesome if I could stager with these rims I want!!!!!!
#25
Lexus Champion
iTrader: (19)
i'm running F 19x8.5+35 235/35/19 and R 19x10 +45 265/30/19, my car vibrates when rolling around 20-40km then smooths out till 120km . i'm only feeling the vibrate coming from the front. I also had an alignment done after the wheels were installed and i still feel the front shake still. Do i need to change to a different tire setup to fix this? thanks
#27
Rookie
Thread Starter
OK I was wondering if I can go with 18" rims
F - 235/45-18
R - 265/40-18
Reason being is we have pretty bad roads up here (Montreal), so going with a staggered and running 35's in the rear, it is only a matter of time before I damage a rim.
I know my speedo will be off, but other than that is there any other problems?
The OD is just 0.02" difference between front and rear.
Thanks
F - 235/45-18
R - 265/40-18
Reason being is we have pretty bad roads up here (Montreal), so going with a staggered and running 35's in the rear, it is only a matter of time before I damage a rim.
I know my speedo will be off, but other than that is there any other problems?
The OD is just 0.02" difference between front and rear.
Thanks
#28
will these fit? 19x8.5 Front +38, 19x10 Rear +43 5x114.3
http://www.lineacorse.com/wheels_lemans.html ????
http://www.lineacorse.com/wheels_lemans.html ????
#30
Driver School Candidate
Join Date: Jul 2010
Location: Maryland
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
for the vossen vvs-086 20x9 front and 20x10.5 rear with tire size 245-30-20 and 285-25-20. I was told there is a .17 difference in diameter. Will that hurt my IS250 AWD?