IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Will those Wheels Fit an IS250 AWD - Part Uno

Thread Tools
 
Search this Thread
 
Old 07-18-12, 08:59 PM
  #151  
laobo979
Lead Lap
iTrader: (5)
 
laobo979's Avatar
 
Join Date: Mar 2008
Location: Mass
Posts: 3,525
Received 66 Likes on 47 Posts
Default

Originally Posted by nitrotang
Would the Avant Garde M310 18x8.5 non-staggered setup with 225/40/18 all around fit with no rub? I'm dropped on F-sport springs.
You should be good

Originally Posted by sexylexygs
2IS guys i really need help. i cant find my answer on the gs side. i have a 06 awd gs300. i have a set of 19'' hre wheel i wanna put in. its 8.5 front and 9.5 rear on 42mm off set on all 4 wheel. my question is what is the idea size tire for it with out rubbing after i drop it about 2 inch. and does any company make air suspension kit for awd gs?
Looks like you can run 225-35-19 front and 265-30-19 rear. They do make air as I've seen one member with a GS AWD with air.
Old 07-19-12, 09:26 AM
  #152  
sexylexygs
Driver School Candidate
 
sexylexygs's Avatar
 
Join Date: Jun 2012
Location: ca
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

thank you laobo979. i can breath now thx again
Old 07-19-12, 09:32 AM
  #153  
sexylexygs
Driver School Candidate
 
sexylexygs's Avatar
 
Join Date: Jun 2012
Location: ca
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

would this be better fit for my awd gs300 on 19 235-35-19 and 275-30-19 ?
Old 07-22-12, 10:59 AM
  #154  
dangerofs
Driver
 
dangerofs's Avatar
 
Join Date: Apr 2012
Location: IL
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default

would the VARRSTOEN ES332 with 19x9.5+22 and 19x10.5+22 fits on is250 awd?
Old 07-27-12, 04:25 PM
  #155  
xredgiex
Driver School Candidate
 
xredgiex's Avatar
 
Join Date: Jan 2012
Location: UT
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dangerofs
would the VARRSTOEN ES332 with 19x9.5+22 and 19x10.5+22 fits on is250 awd?

Depends on how low you are, how much you're willing to stretch your tires, and how much camber you want to run.
I have 19x9 and 19x10 et 24 with 215-35-19 and 225-35-19 tires. I had to roll my fenders and stretch the tires. The wheels poke just a bit, but thats what i wanted.
Anything is possible. Its all in how much work you want to do
Old 07-27-12, 06:54 PM
  #156  
07awdis250
Pole Position
iTrader: (1)
 
07awdis250's Avatar
 
Join Date: Mar 2012
Location: fl
Posts: 312
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by xredgiex
Depends on how low you are, how much you're willing to stretch your tires, and how much camber you want to run.
I have 19x9 and 19x10 et 24 with 215-35-19 and 225-35-19 tires. I had to roll my fenders and stretch the tires. The wheels poke just a bit, but thats what i wanted.
Anything is possible. Its all in how much work you want to do
Do you have any pictures?
Old 07-29-12, 06:03 PM
  #157  
xredgiex
Driver School Candidate
 
xredgiex's Avatar
 
Join Date: Jan 2012
Location: UT
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 07awdis250
Do you have any pictures?
This is with only 2" springs.


Name:  IMG_0355.jpg
Views: 2061
Size:  346.4 KB
Name:  IMG_0357.jpg
Views: 2453
Size:  274.4 KB
Old 08-20-12, 02:25 PM
  #158  
StrmTrpLex
Rookie
 
StrmTrpLex's Avatar
 
Join Date: Mar 2012
Location: Colorado
Posts: 78
Received 8 Likes on 7 Posts
Default

Anybody know what offset I can go with for 20s on a is350 awd??
Old 08-20-12, 03:16 PM
  #159  
S2KIS250
Driver School Candidate
 
S2KIS250's Avatar
 
Join Date: Aug 2012
Location: AB
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

a little different scenario here...not going to ballin rims or anything like that, just wanted to see if anyone thought my old winter rims would fit the 250 AWD?

they're the stock 8thgen civic rims, 16"x6.5 i believe. +45 offset, 5x114.3 of course, 64.1mm bore (would get hub rings of course). The tires currently on em are 215/55/16, i think if i had the correct specs of the stock AWD i should be within about 1% rolling diameter. Assuming these will clear the stock brakes etc etc, anyone see any trouble running these for my winters?
Old 08-20-12, 05:06 PM
  #160  
RDIS250AWD
Lead Lap
iTrader: (7)
 
RDIS250AWD's Avatar
 
Join Date: Sep 2011
Location: OH
Posts: 4,933
Received 91 Likes on 38 Posts
Default

Originally Posted by S2KIS250
a little different scenario here...not going to ballin rims or anything like that, just wanted to see if anyone thought my old winter rims would fit the 250 AWD?

they're the stock 8thgen civic rims, 16"x6.5 i believe. +45 offset, 5x114.3 of course, 64.1mm bore (would get hub rings of course). The tires currently on em are 215/55/16, i think if i had the correct specs of the stock AWD i should be within about 1% rolling diameter. Assuming these will clear the stock brakes etc etc, anyone see any trouble running these for my winters?
16s on a 2IS would look terrible.
As for your question about staggered set ups and 20s
I'm running staggered on both my winter and summer set. As long as you keep the rolling diamater close to stock then you wont have any issues. Many of us have done it. View this thread https://www.clublexus.com/forums/is-...-mother-thread


Figure out exactly what size wheels you want what off sets it would help answer your question easier. This thread should help you get a better understanding https://www.clublexus.com/forums/is-...tart-here.html

Heres the wheel index members have posted their set ups on
https://www.clublexus.com/forums/is-...ead-index.html

And if you want to run a very aggressive set up view this thread
https://www.clublexus.com/forums/is-...el-thread.html

Last edited by RDIS250AWD; 08-21-12 at 09:57 AM.
Old 08-22-12, 12:49 PM
  #161  
nitrotang
Lead Lap
iTrader: (2)
 
nitrotang's Avatar
 
Join Date: Aug 2009
Location: CA
Posts: 545
Received 14 Likes on 9 Posts
Default

Does anyone have any pics and/or experience with these 18" LFA replicas? http://www.ebay.com/itm/280926000664...#ht_3935wt_929
Old 09-01-12, 03:19 PM
  #162  
StrmTrpLex
Rookie
 
StrmTrpLex's Avatar
 
Join Date: Mar 2012
Location: Colorado
Posts: 78
Received 8 Likes on 7 Posts
Default

Originally Posted by xredgiex
This is with only 2" springs.



Looks great! I always thought a 2 inch drop will definitely be lower though..
Old 09-05-12, 09:57 AM
  #163  
reyoasian
Lexus Champion
iTrader: (2)
 
reyoasian's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 2,341
Received 4 Likes on 4 Posts
Default

Anybody know

IS250 AWD dropped on H&R

XXR 527 18x8.75 +20.....

will I need a roll?
Old 09-18-12, 06:50 PM
  #164  
bola
Driver School Candidate
 
bola's Avatar
 
Join Date: Mar 2012
Location: ontario
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default varrstoen on my IS awd

Wondering if the Varrstoen ES 112
19x9.5
19x11
Would these fit on my 08 is awd, What tiires are recommended and if I can do 235/35/19 all around?
Thank you.
Old 09-19-12, 11:57 PM
  #165  
soleeasii
Pole Position
iTrader: (10)
 
soleeasii's Avatar
 
Join Date: Jun 2009
Location: VA
Posts: 389
Likes: 0
Received 1 Like on 1 Post
Default

I just got my front Diff and driver axel replaced at 37k miles.. wheels were put on at about 18k.

I was running 235-35-19 and 265-30-19.


Quick Reply: Will those Wheels Fit an IS250 AWD - Part Uno



All times are GMT -7. The time now is 08:19 PM.