When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would this work for the F-sport seats? They're not ventilated, but could this be done to make them cold somehow?
No.
What this mod is doing is directing more cold air into the vented seat system. Since you don't have that directing more air into something that doesn't exist won't do much for you.
I did the same as maxframes and used the rubber molding for walls (Home Depot, $3 for six feet). I didn't connect it directly to the fan though, just tucked into the carpet on the bottom of the seat directly behind the fan. Same with the vent side, just tucked below the vent. The molding is very soft and moves easily with the seat, and I could tell the difference right away.
One question. Does anyone know how to clean the fan? I'm assuming there is a filter on the intake, and since mine's an '07 it may be a bit dirty and restricting the air flow.
If you want to still blow air to the people in the backseat you could just fold that material over one of the holes pictured like a pipe. Half the cold air to the seat, half the cold air to the feet in the back. Definitely want to try this mod.
06-19-11, 11:18 AM
