Rate my ride 2
06-13-10, 10:05 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2010
Location: OR
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Rate my ride 2
Sorry if you saw my first post but the rain finally stopped and I was able to clean my car. A lot of people sent personal messages wanting to see the car clean so I figured I would post again. Car is lowered on H&R springs 1.4 in the front ant 1.3 in the back. I would have loved to have gone lower but it is an all wheel drive so it already has the vibration from the lower and its my wifes daily driver. I have a lip kit and rear spoiler, HID's, LED DRL's and yellow fogs. Hope you like it but if you dont I still do lol, thanks.
PLEASE VIEW PICS ON PAGE 2 AS WELL BEFORE MAKING A DECISION.
PLEASE VIEW PICS ON PAGE 2 AS WELL BEFORE MAKING A DECISION.
Last edited by 2008AWD250; 06-16-10 at 02:32 PM.
06-13-10, 10:25 PM
#3
I am not sure what it is about the first picture. The car doesnt look lowered. I can only blame the angle of the driveway and the lighting. Maybe its the lack of rubber on the tires but it seemed to have a gap between the fender and the tire in the rear.
The paint is clean as hell, mad props on keeping the black that clean. With the paint looking that good, you should hunt around for different lighting to really show it off. Its a good start!
The paint is clean as hell, mad props on keeping the black that clean. With the paint looking that good, you should hunt around for different lighting to really show it off. Its a good start!
Trending Topics
06-14-10, 09:39 PM
#15
Driver School Candidate
Thread Starter
Join Date: Jun 2010
Location: OR
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I replaced only the springs and the ride is fine but I do have the vibration when in reverse or drive and at a complete stop. Dont know what causes it or how to fix it.... Hopefully those pictures clear up how much gap there is.