When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
trying to get one for the trunk but not sure which will work
Originally Posted by bob4256
I used the same one that I used for the rear dome light. Its a tight fit, but it works
You'll most likely have to hammer in the ends slightly to make it fit. The trunk light is even smaller than the rear dome light.
Originally Posted by Jpis10
Brociouz, would you suggest any bulb to get an 6000k look for fogs or just go with HIDs?
Pretty sure you won't be able to get anywhere near 6000K without HIDs. I used DDM Tuning 6000K fogs, which matched my 6000K Garax low beams quite well.
You'll most likely have to hammer in the ends slightly to make it fit. The trunk light is even smaller than the rear dome light.
Yeah I thought I would need to do that but the LED fit for me. The little metal part that holds the led in place (I dont know what its called) is sitting crooked at an angle since the LED is a little too big to fit.
is there a led that we can use to replace foot well light ?
Not sure if you can swap a LED in there but most people just use LED strips
I used an oznium scion switch (almost fits perfect. Some light sanding is needed to make it fit perfect) and 2 blue LED strips in the driver and passenger side, all from VLEDs.
but is there one that is just plug and play without the switch? and that it comes on and off like the stock white light?
I think what people do is tap into the stock light and wire the LEDs to it. I wanted to control when the LEDs would be on, which is why I added the switch.
Search for the footwell led DIY and it should help you