Brightest LED Parking Light - the Definitive Guide
09-02-10, 05:37 PM
#61
for sure man, you'll see another thread started once i get these LEDs and my HID lows and fogs installed
09-07-10, 01:45 PM
#62
Driver School Candidate
iTrader: (2)
Join Date: Jul 2009
Location: CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
to brocriouzquestion though how many bulbs do you need for the head lights? 2 each side... right? so a total of 4?
and do you know if these will fit in the puddle light aswell?
09-07-10, 01:52 PM
#63
There is only one parking light on each side, so one pair/order and you're set.
For the puddle light you'll need flank bulbs. Check out this thread: https://www.clublexus.com/forums/is-...de-w-pics.html
For the puddle light you'll need flank bulbs. Check out this thread: https://www.clublexus.com/forums/is-...de-w-pics.html
10-01-10, 02:02 AM
#64
Lexus Test Driver
So i bought this T15 wedge bulb and they dont fit into the housing (parking lights)
http://store.ijdmtoy.com/iJDMTOY-JDM...-p/led_t15.htm
Just wondering is T15 the wrong size bulb?
http://store.ijdmtoy.com/iJDMTOY-JDM...-p/led_t15.htm
Just wondering is T15 the wrong size bulb?
10-01-10, 06:14 PM
#68
Lexus Test Driver
They said this will fit better.
http://store.ijdmtoy.com/-p/lp_mazda_c3_02.htm
But the width is 0.45 Inch, compare to the T15 which is 0.5Inch.
The T15 was crazily couldnt fit into the gaps, so it 0.05" any different lol.
http://store.ijdmtoy.com/-p/lp_mazda_c3_02.htm
But the width is 0.45 Inch, compare to the T15 which is 0.5Inch.
The T15 was crazily couldnt fit into the gaps, so it 0.05" any different lol.
10-06-10, 04:10 PM
#70
This: http://www.v-leds.com/Exterior-LED/C...85865-1-2.html
Or if you want a little brighter this: http://www.v-leds.com/Interior-LED/G...04828-1-2.html
Or if you want a little brighter this: http://www.v-leds.com/Interior-LED/G...04828-1-2.html
10-06-10, 04:29 PM
#72
10-14-10, 05:14 AM
#74
Lexus Test Driver
ok so i got these. Just wondering what is the difference between SMT and SMD?
When i put them on, they are bluer than i thought as they differ heaps from my 6000K low beam.
When i put them on, they are bluer than i thought as they differ heaps from my 6000K low beam.
10-14-10, 05:19 AM
#75
i think they mean the same thing?
SMT = surface mount technology
SMD = surface mount device
i think they refer to the same thing? lol maybe my mind is too simple
yesss i got my 6000K LEDs from v-leds since my HIDs were 6000K, and i wish i got 5000K instead. i guess LEDs have a much more accurate color temp output than HIDs. HIDs defer from bulb quality and depend a lot on power output to affect the color temp it gives
so a lot of 6000K HIDs actually do not have the blue hue everyone says they do.. it's more like a stinging white instead of a warmer white that 5000K has.