Will those wheels fit? START HERE.
#5282
Will these fit on my Stock 2007 AWD?
http://motivwheels.com/wheel_item/modena-409b/
Wheel Size: 18x8 Bolt pattern: 5x4.50/5x120 Offset:42mm
Squared Set-up with recommend tire size?
http://motivwheels.com/wheel_item/modena-409b/
Wheel Size: 18x8 Bolt pattern: 5x4.50/5x120 Offset:42mm
Squared Set-up with recommend tire size?
#5283
Driver School Candidate
Join Date: Jun 2016
Location: Manitoba
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Curious about tires and wheels
I just bought a 2006 is350 and i really want to get the audi rs3/rs5 replica wheels. the specs on them are 19x8.5 +38 66.6 hub. i am wondering if they will fit in the front and rear since i am going to need the bolt pattern adapters from 5x112 to 5x114.3 which will be an additional inch. and also what would be the recommended tires to run on these wheels to make this setup fit on stock height.
http://www.rtxwheels.com/en/wheels/r...chined?cid=677
http://www.rtxwheels.com/en/wheels/r...chined?cid=677
Last edited by ortymd34; 06-12-16 at 05:28 PM.
#5284
Driver School Candidate
Join Date: Apr 2016
Location: Southern California
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Will these fit on my Stock 2007 AWD?
http://motivwheels.com/wheel_item/modena-409b/
Wheel Size: 18x8 Bolt pattern: 5x4.50/5x120 Offset:42mm
Squared Set-up with recommend tire size?
http://motivwheels.com/wheel_item/modena-409b/
Wheel Size: 18x8 Bolt pattern: 5x4.50/5x120 Offset:42mm
Squared Set-up with recommend tire size?
#5285
Driver School Candidate
Join Date: Apr 2016
Location: Southern California
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I just bought a 2006 is350 and i really want to get the audi rs3/rs5 replica wheels. the specs on them are 19x8.5 +38 66.6 hub. i am wondering if they will fit in the front and rear since i am going to need the bolt pattern adapters from 5x112 to 5x114.3 which will be an additional inch. and also what would be the recommended tires to run on these wheels to make this setup fit on stock height.
http://www.rtxwheels.com/en/wheels/r...chined?cid=677
http://www.rtxwheels.com/en/wheels/r...chined?cid=677
#5288
Driver School Candidate
Join Date: Oct 2015
Location: Belarus
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hi, guys
Whether I will be able to set such parameters to a stock is350 2006
Wheels Work Euroline Fe
Fronts: 18x8 Et+38 225/40/18 tires
Rears: 18x9 Et+42 245/40/18 tires
Whether I will be able to set such parameters to a stock is350 2006
Wheels Work Euroline Fe
Fronts: 18x8 Et+38 225/40/18 tires
Rears: 18x9 Et+42 245/40/18 tires
Last edited by brazilero; 06-28-16 at 06:03 AM.
#5291
Pole Position
How will this fit? Any pictures?
Going to put on 19x8.5" +35 on all four soon. What tire size is good? (I'm thinking 245/35/19, also willing to go 235/35 but not lower). Also, how much can I drop my car? I have coils so I can adjust them if needed. Will these specs rub? I am also willing to remove fender liners and roll my fenders if needed.
Last edited by knyg; 08-10-16 at 10:36 AM. Reason: Added words
#5292
Pole Position
lexus IS are 5x114.3 for the bolt patterns. Your rims won't fit if you plan on putting it on just like that. You'll need some modifications, not even sure if it's possible. Sorry, you got the wrong bolt patterns.
#5293
what's up CL...got new shoes and wondering about 35 profile tires for 18s. I previously had work meister S1 18x8.5 / 18x9.5 with 40pros but had rubbing issues (car lowered on coils). Was wondering if anyone had photo or opinions for 18s with 35 profile tires for 2nd gen IS250
New shoes: Leon Hardiritt Ordens 18x9 / 18x10 planning on running 225/35/18 and 245/35/18. Anyone advise/photos would be greatly appreciated.
New shoes: Leon Hardiritt Ordens 18x9 / 18x10 planning on running 225/35/18 and 245/35/18. Anyone advise/photos would be greatly appreciated.
#5294
Driver School Candidate
Looking at some Niche Misano wheels for my 2011 IS250 AWD and trying to decide if I should go with 19x9.5 et +35 vs 19x8.5 et +35. Will the 9.5 width fit on the front without issue? Will they stick out past the fender? I'm at stock height, so I think I'll be fine with tire clearance no matter what I run, just want to make sure I don't stick out past the fenders too much and that I don't hit components inside the wheel well due to being too wide.
Thanks
Thanks
#5295
Looking at some Niche Misano wheels for my 2011 IS250 AWD and trying to decide if I should go with 19x9.5 et +35 vs 19x8.5 et +35. Will the 9.5 width fit on the front without issue? Will they stick out past the fender? I'm at stock height, so I think I'll be fine with tire clearance no matter what I run, just want to make sure I don't stick out past the fenders too much and that I don't hit components inside the wheel well due to being too wide.
Thanks
Thanks