When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Front 19x8.5, Rear 19x10 forget the offset, I plan to run 215/35/19, 245/35/19
1. is it gonna be safe?
2. another option 225/35/19, 265/30/19 which one has better look? safety?
Thanks
SO im thinking of getting some enkei nt03 18x9.5 +27 wrapped on 225/40 and then for the rear 18x10.5 +30 on 255/40. What problems will i be running into for the front and rear? thanks!
SO im thinking of getting some enkei nt03 18x9.5 +27 wrapped on 225/40 and then for the rear 18x10.5 +30 on 255/40. What problems will i be running into for the front and rear? thanks!
how low are you going?
and why the 40's? I'd do 235/35 in the front and 255/35 in the rear.
with 235's, you'll need to have your fenders rolled, no pull needed. but you will need to relocate that bumper tab in the front (depending on how low you are, but if you are lower than spring height than you'll need to shave them away)
and why the 40's? I'd do 235/35 in the front and 255/35 in the rear.
with 235's, you'll need to have your fenders rolled, no pull needed. but you will need to relocate that bumper tab in the front (depending on how low you are, but if you are lower than spring height than you'll need to shave them away)
235/35-18 in the front, 255/40-18 in the rear = maintain near-OEM rolling diameter.
the fronts will require more work than the rear. front and rear will require at least a fender roll.
and why the 40's? I'd do 235/35 in the front and 255/35 in the rear.
with 235's, you'll need to have your fenders rolled, no pull needed. but you will need to relocate that bumper tab in the front (depending on how low you are, but if you are lower than spring height than you'll need to shave them away)
Well im going with the 40's since i have them on the stocks. If i gotta get another size i will but i really wanna try to keep that tire size. As far as ride height i would say i have a finger gap all around. So a roll all around? and shave the tabs and I should be good?