LilMan23

iTrader: (3)

hey guys i just order the vinyl to redout my tail lights from areotect is it perfect fitment? do i just stick the red vinyl over the orange?

aliu603

iTrader: (18)

pretty much

Initial G

iTrader: (38)

^ It's basically what you have to do. I'm sure it will come with instructions if you need it. But it's pretty simple. +

iSpeed250

its pretty straight forward. just align it and stick it on.

Jetfire

iTrader: (3)

do you have 06-08 or 09+ ?

i found the 09+ to be a bit harder to put on since there's 2 different pieces and nothing really to line them up. the 06-08 ones are rectangles and way easier to line up.

Jetfire

iTrader: (3)

do you have 06-08 or 09+ ?

i found the 09+ to be a bit harder to put on since there's 2 different pieces and nothing really to line them up. the 06-08 ones are rectangles and way easier to line up.

Fuzzie

iTrader: (6)

its slightly longer so u will have to cut it.. i just sealed it right over to the black part.. no one will see it so it dont bother me

AeroTect

For the '06-'08, they are designed to be just a bit bigger than the Amber Portion. Line it up on the trunk side and go.

Find instructions for our products here:

http://aerotect.net/Instructions.html

Or more product specific here:
http://aerotect.net/Instructions/Red..._2006-2008.pdf

trixxx519

iTrader: (14)

pretty much spray the area with water+soap and then just stick it on and get the water out with a card, fitment is good and good luck

ernestfyu

iTrader: (6)

yeah i cried doing the 09s =(
jk ^^ its still easy

LilMan23

iTrader: (3)

hahaha thanks guys but do i really need to spray soap+water? or can i just try to stick it on right away =]

06isDriver

you definitely need the soapy water...pick you up a spray bottle from autozone or something and make a very diluted soap/water mixture. Maybe like a teaspoon of liquid soap and the rest water.

Otherwise, EVERYTHING will stick to the vinyl and it wont slide around for perfect positioning.

If you try to touch the vinyl without soapy water on your fingers it could even pick up your finger prints and be there permanently.

Good luck!! i just did mine the other day.

LilMan23

iTrader: (3)

was it easy to take out the bubbles? hahaha wanna help me with mine? =P

trixxx519

iTrader: (14)

yea easy to squeeze out the extra liquid/water/soap/bubbles, just use a credit card

LilMan23

iTrader: (3)

alright i just need to spray a lil water/soap right? not a whole lot as long as its moist? so i can arrange the vinyl around