Pic of your 2IS - RIGHT NOW!
Lead Lap
iTrader: (10)
Join Date: Oct 2008
Location: NorCal
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Instructor
Finally got some sweet shoes!!!! car is dirty as hell and only had crappy cell pic.
19'' Volk TE37's. Black with polished lip, Volk Time Attack decals in Red and Volk carbon fiber center caps.
19x8.5 (fronts) +22
19x9.5 (rears) +22
19'' Volk TE37's. Black with polished lip, Volk Time Attack decals in Red and Volk carbon fiber center caps.
19x8.5 (fronts) +22
19x9.5 (rears) +22
Last edited by BS ISF; 05-11-12 at 11:59 AM.
Instructor
iTrader: (7)
tell me where the hell you found your center caps and I'll tell you the tire sizes
I ordered 225/35/19 for the front and 255/35/19 for the rear. I'm lowered on H&Rs...no rubbing as of yet
Driver
iTrader: (2)
and finally your price!...
call me if you done! waiting for DIY!
So this is what i done...
i used Hyundai Center Cap
i removed the hyundai layer with a screwdriver...(you can use a knife instead)
take care don't brake it with high pressure of your hand...
you can warm it to remove the tape easier
now use your fingers to remove the tape...
after removing the Hyundai layer you must use rubber to remove H shape from the center cap...
don't let the rubber go to basic layer....
after that use a sand paper to get it smooth
now use a softer sand paper to get it more and more smooth...
(take care of edge)
now use a spray color to paint it if you want a decals on it
after paint let color to dry... now use your decals on it...
if you want to use your L logo you can buy it from a shop and use tape to take on it....
Enjoy it...
i used Hyundai Center Cap
i removed the hyundai layer with a screwdriver...(you can use a knife instead)
take care don't brake it with high pressure of your hand...
you can warm it to remove the tape easier
now use your fingers to remove the tape...
after removing the Hyundai layer you must use rubber to remove H shape from the center cap...
don't let the rubber go to basic layer....
after that use a sand paper to get it smooth
now use a softer sand paper to get it more and more smooth...
(take care of edge)
now use a spray color to paint it if you want a decals on it
after paint let color to dry... now use your decals on it...
if you want to use your L logo you can buy it from a shop and use tape to take on it....
Enjoy it...
if you want to spend time this way is the best,,, no want to loose time just order a ordinary lexus center caps...
I cant find the lips of front bumper in my country
Last edited by Javahersaz; 05-11-12 at 03:51 PM.
Lexus Champion
iTrader: (7)
Lexus Champion
iTrader: (7)
Pole Position
iTrader: (5)
too tired to wash it today, hopefully they come off easy tomorrow, but very doubtful