Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior
- How to Install a Navigation System
Step by step instructions for do-it-yourself repairs
Browse all: Interior
FlyAudio In-Dash Multimedia GPS Navigation System for Lexus IS250/350
#2266
Driver School Candidate
iTrader: (2)
Join Date: Feb 2011
Location: socal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
No man, my unit does not have Bluetooth Audio streaming! I wish it did, the only problem I have with the unit is that the Ipod cord provided is not long enough! They wired mine under the shifter and into my center console, which means my iPhone must ride in the console! Other than that the unit is flawless as of right now!!!!
The only issue I had was terrible sound quality. But when I plugged in a Lightning to 30 pin adapter to the iPod cable [I was preparing to revert back to plugging in my phone to the cable], it fixed all sound issues. I suspect there's some sort of grounding issue somewhere. I just leave the adapter on the cable, even though I'm not plugging in the phone. I've finally got both audio and phone calls streaming through Bluetooth now and the sound quality is amazing.
#2267
Driver School Candidate
iTrader: (2)
Join Date: Feb 2011
Location: socal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
iGo Primo out of memory error
I've decided to switch from Odyssey's navigation program to iGo Primo, but whenever I try to load up the application, I get an out of memory error. Any ideas? I can get iGo 8 to work, but not Primo.
#2271
Lead Lap
iTrader: (1)
Here are the contents of the my sys.txt file. They worked with iGo 8.3 and Primo (1.2 and 2.0). If you want to try these setting, you'll need to change the path to iGo's application and content folders. Good luck guys.
[map]
2dheadup=1
[folders]
app="SDMEM/IGO_primo"
content=SDMEM/IGO_primo/content
;[interface]
;shutdown_time=0
[3d_config]
disable_roadsign_navigation_mode=0
[interface]
laneinfo_signpost_enabled=1
[rawdisplay]
screen_x=800
screen_y=480
highres=0
[gps]
port=6
baud=4800
[map]
2dheadup=1
[folders]
app="SDMEM/IGO_primo"
content=SDMEM/IGO_primo/content
;[interface]
;shutdown_time=0
[3d_config]
disable_roadsign_navigation_mode=0
[interface]
laneinfo_signpost_enabled=1
[rawdisplay]
screen_x=800
screen_y=480
highres=0
[gps]
port=6
baud=4800
#2274
Driver School Candidate
iTrader: (1)
Join Date: Nov 2012
Location: TN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I am running iGo Primo 2.0 and yesterday it started saying that it couldn't load the GPS. It is asking me to choose the file to read from and I choose the file and it just sits there. I have looked through and did not see anything on this. Can someone help me with what I need to do to get this fixed?
Thanks
Thanks
#2275
Racer
iTrader: (7)
I am running iGo Primo 2.0 and yesterday it started saying that it couldn't load the GPS. It is asking me to choose the file to read from and I choose the file and it just sits there. I have looked through and did not see anything on this. Can someone help me with what I need to do to get this fixed?
Thanks
Thanks
#2276
Lead Lap
iTrader: (1)
I am running iGo Primo 2.0 and yesterday it started saying that it couldn't load the GPS. It is asking me to choose the file to read from and I choose the file and it just sits there. I have looked through and did not see anything on this. Can someone help me with what I need to do to get this fixed?
Thanks
Thanks
Good luck
#2279
Driver School Candidate
Join Date: Feb 2013
Location: Utah
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I have an 2008 IS350 without the Nav.. where do I get one of these units and how much do they run? and do they play DVDs? or do I need to buy something else for that to happen?
#2280
Lead Lap
iTrader: (1)
Good luck