Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior
- How to Install a Navigation System
Step by step instructions for do-it-yourself repairs
Browse all: Interior
FlyAudio In-Dash Multimedia GPS Navigation System for Lexus IS250/350
#2026
Instructor
iTrader: (2)
Question for those using iGo Primo: Does it give you POI search result with direction arrows?
I'm using iGo8 and it doesn't, just a hard list and that annoys me because my handheld Garmin uses arrows and it's so handy:
Example:
So if Primo does that then I'll consider upgrading....
I'm using iGo8 and it doesn't, just a hard list and that annoys me because my handheld Garmin uses arrows and it's so handy:
Example:
So if Primo does that then I'll consider upgrading....
#2027
Pole Position
Well, apparently my MicroSD slot isn't working... i have bought a new SD card yet the system refuse to read it... is there anyway to fix this? or is there a way to install the navigation system without using SD?
#2030
Driver School Candidate
Join Date: May 2012
Location: ao
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hi everybody! I'am a happpy owner of es350 2008y. Bought it couple days before. And it has flyaudio e8041 allready installed. I readed all this forum. And I think my flyaidio is 2gen. And now I have all problems discussed there.
1. Climat - Celsius temp, works with a lot of mistakes,
2. Radio fm shows around 80 MHz, but really plays frequencys from 100-...
3. Wheel buttons do not work with iPod and MP3. Only volume works.
So now I have next ideas:
1. Bios upgrade.
2. Check all wires to fix buttons.
3. Change yellow wire place.
So please help, is my plan wrong or right? Can it helps me?
Sorry for bad English...
1. Climat - Celsius temp, works with a lot of mistakes,
2. Radio fm shows around 80 MHz, but really plays frequencys from 100-...
3. Wheel buttons do not work with iPod and MP3. Only volume works.
So now I have next ideas:
1. Bios upgrade.
2. Check all wires to fix buttons.
3. Change yellow wire place.
So please help, is my plan wrong or right? Can it helps me?
Sorry for bad English...
#2031
Pole Position
iTrader: (2)
Join Date: Jul 2011
Location: g town
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Hi everybody! I'am a happpy owner of es350 2008y. Bought it couple days before. And it has flyaudio e8041 allready installed. I readed all this forum. And I think my flyaidio is 2gen. And now I have all problems discussed there.
1. Climat - Celsius temp, works with a lot of mistakes,
2. Radio fm shows around 80 MHz, but really plays frequencys from 100-...
3. Wheel buttons do not work with iPod and MP3. Only volume works.
So now I have next ideas:
1. Bios upgrade.
2. Check all wires to fix buttons.
3. Change yellow wire place.
So please help, is my plan wrong or right? Can it helps me?
Sorry for bad English...
1. Climat - Celsius temp, works with a lot of mistakes,
2. Radio fm shows around 80 MHz, but really plays frequencys from 100-...
3. Wheel buttons do not work with iPod and MP3. Only volume works.
So now I have next ideas:
1. Bios upgrade.
2. Check all wires to fix buttons.
3. Change yellow wire place.
So please help, is my plan wrong or right? Can it helps me?
Sorry for bad English...
#2033
Instructor
iTrader: (2)
Hi everybody! I'am a happpy owner of es350 2008y. Bought it couple days before. And it has flyaudio e8041 allready installed. I readed all this forum. And I think my flyaidio is 2gen. And now I have all problems discussed there.
1. Climat - Celsius temp, works with a lot of mistakes,
2. Radio fm shows around 80 MHz, but really plays frequencys from 100-...
3. Wheel buttons do not work with iPod and MP3. Only volume works.
So now I have next ideas:
1. Bios upgrade.
2. Check all wires to fix buttons.
3. Change yellow wire place.
So please help, is my plan wrong or right? Can it helps me?
Sorry for bad English...
1. Climat - Celsius temp, works with a lot of mistakes,
2. Radio fm shows around 80 MHz, but really plays frequencys from 100-...
3. Wheel buttons do not work with iPod and MP3. Only volume works.
So now I have next ideas:
1. Bios upgrade.
2. Check all wires to fix buttons.
3. Change yellow wire place.
So please help, is my plan wrong or right? Can it helps me?
Sorry for bad English...
The climate and FM radio display issues should be fixed by software, assuming Flyaudio has one released for your generation unit.
#2034
Well, apparently my MicroSD slot isn't working... i have bought a new SD card yet the system refuse to read it... is there anyway to fix this? or is there a way to install the navigation system without using SD?
#2035
Pole Position
So everything work other then the SD reader? honestly i don't care about the Navigation much since i like garmin more...however, if there's a way to fix this problem i'm all about it.
#2037
Driver School Candidate
Join Date: Feb 2009
Location: Germany
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
In the amount of responses after this question, I saw nothing but the incorrect answer. I have a second generation unit and it WILL play AVI files (no MP4 for some reason) from a USB drive. The drive must be FAT32. Just go to the DVD section, select USB mode, then click on "Folder" and find the folder that contains the videos. Once there, click on "File" and it should display the videos.
One other note, I have iGo Primo 2 working with 3D terrain and buildings. The movement is comparable (in "smoothness") to a Garmin 3700 series.
One other note, I have iGo Primo 2 working with 3D terrain and buildings. The movement is comparable (in "smoothness") to a Garmin 3700 series.
#2039
Driver School Candidate
Join Date: Feb 2009
Location: Germany
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Question for those using iGo Primo: Does it give you POI search result with direction arrows?
I'm using iGo8 and it doesn't, just a hard list and that annoys me because my handheld Garmin uses arrows and it's so handy:
So if Primo does that then I'll consider upgrading....
I'm using iGo8 and it doesn't, just a hard list and that annoys me because my handheld Garmin uses arrows and it's so handy:
So if Primo does that then I'll consider upgrading....
#2040
Instructor
iTrader: (2)
In the amount of responses after this question, I saw nothing but the incorrect answer. I have a second generation unit and it WILL play AVI files (no MP4 for some reason) from a USB drive. The drive must be FAT32. Just go to the DVD section, select USB mode, then click on "Folder" and find the folder that contains the videos. Once there, click on "File" and it should display the videos.
One other note, I have iGo Primo 2 working with 3D terrain and buildings. The movement is comparable (in "smoothness") to a Garmin 3700 series.
One other note, I have iGo Primo 2 working with 3D terrain and buildings. The movement is comparable (in "smoothness") to a Garmin 3700 series.
Mine's the Gen 2. Would you mind terribly to take a camera shot of the POI list screen with the arrows? Not that I don't believe you but I just want to make sure it shows the right amount of info I'm looking for. Thanks again!