01-07-15, 01:07 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior
- How to Install a Navigation System
Step by step instructions for do-it-yourself repairs
Browse all: Interior
FlyAudio In-Dash Multimedia GPS Navigation System for Lexus IS250/350
01-28-12, 11:47 AM
#1788
Lexus Test Driver
Join Date: Sep 2006
Location: Hawaii
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
01-30-12, 09:25 PM
#1791
Does anyone know if you can get an aftermarket Satalite radio for this such as Vias auto? Will it interface with this unit?
I keep reading a lot of problems with this, but I really want one. Can an OEM nav unit be swapped in a non nav car or is this my only option?
I keep reading a lot of problems with this, but I really want one. Can an OEM nav unit be swapped in a non nav car or is this my only option?
01-31-12, 06:02 AM
#1792
Driver School Candidate
Join Date: Oct 2010
Location: PA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I have e-mailed the FlyAudio US site 2 times over the past 3 days but haven't received a response regarding the temperature issue update....can anyone that has the firmware update e-mail it to me?
02-07-12, 12:54 PM
#1794
Just got my Bios update from David over at Carlighttrends.com, and newest firmware has just about fixed the AC Temp values. The values are off by just a few degrees now, not like it was before when they where off by something like 25 degrees.
Now if anyone complains, I honestly would say that they are just WAY to picky. Its totally acceptable now!
Now if anyone complains, I honestly would say that they are just WAY to picky. Its totally acceptable now!
02-07-12, 01:39 PM
#1797
Aslong AM is audible im okay with that.
does anyone know how to get steering wheel buttons (phone button) to work on a IS without it.
do i just need to replace the circuit board and buttons with the phone button and it will work with fly audio? or is there something in-between like a headunit that needs to be changed as well
does anyone know how to get steering wheel buttons (phone button) to work on a IS without it.
do i just need to replace the circuit board and buttons with the phone button and it will work with fly audio? or is there something in-between like a headunit that needs to be changed as well
02-09-12, 04:12 AM
#1799
Aslong AM is audible im okay with that.
does anyone know how to get steering wheel buttons (phone button) to work on a IS without it.
do i just need to replace the circuit board and buttons with the phone button and it will work with fly audio? or is there something in-between like a headunit that needs to be changed as well
does anyone know how to get steering wheel buttons (phone button) to work on a IS without it.
do i just need to replace the circuit board and buttons with the phone button and it will work with fly audio? or is there something in-between like a headunit that needs to be changed as well
02-09-12, 04:17 AM
#1800
Contact the place where you got your FlyAudio unit, and see if they can get the new updated Bios Firmware. I can tell you that I'm even happier with my FlyAudio navigation unit now since I updated to the latest firmware.
I forgot to write this before, my steering wheel buttons have always worked with my FlyAudio Navigation with out any problems. Now It used too have a small amount of lag, but it got fixed after the newest update.