18" aftermarket wheels on 2IS?
#541
Rookie
iTrader: (3)
I pulled for extra clearance. It wasn't much pull, just enough that if the roll wasn't good enough, I didn't have to go back under the car. It was kinda rushed and dumb on my part. I don't have any issues with rubbing. My fender tabs have been relocated so the fronts are completely clear, you only see that on the AWD.
#545
Driver School Candidate
Sorry for the late reply!! For my setup I got:
-STR flow forged 902's
-18x9.5 +25 offset
- Evergreen EU72
- 235/40/18
I didn't pick out the rubber for them but I like the setup they put me on. Just enough stretch👌🏽
-STR flow forged 902's
-18x9.5 +25 offset
- Evergreen EU72
- 235/40/18
I didn't pick out the rubber for them but I like the setup they put me on. Just enough stretch👌🏽
#547
Driver School Candidate
Join Date: Nov 2015
Location: GA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
What does it mean by AGGRESSIVE look? I know that the stock offset is 35mm and these are 30mm in the front. Is this going to cause rubbing issues or anything? I do have a set of Tein springs that I want to put on as well. I want the wheels to be even with the body. I am dumb as hell when it comes to wheels. I also have a set of Tein S tech lowering springs that I have yet to put on.
http://www.ebay.com/itm/18-ESR-SR08-Wheels-For-Lexus-LS430-SC300-18x8-5-30-18x9-5-35-5x114-3-Rims/381725693319?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D38530%26meid%3Dd5eb5056d0624171a26c38b14e63e446%26pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D391532278339
would there be anything i need to worry about with these wheels?
http://www.ebay.com/itm/18-ESR-SR08-Wheels-For-Lexus-LS430-SC300-18x8-5-30-18x9-5-35-5x114-3-Rims/381725693319?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D38530%26meid%3Dd5eb5056d0624171a26c38b14e63e446%26pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D391532278339
would there be anything i need to worry about with these wheels?
Last edited by Swish; 08-27-16 at 02:55 PM.
#550
Driver School Candidate
Has any one here ever had these wheels on their isx50 or have a picture of someone that has? They're the 5Zigen Pro Racer GN+. Ive only seen them in an is300. I might buy some so i want to see a picture on an isx50 before i do. Thanks!
The following users liked this post:
sede7 (05-04-21)
#551
Driver School Candidate
Join Date: Dec 2015
Location: Washington
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Got a 07 awd currently on tom's c7r
F-17x8 +32 225/45R17
R-17x8 +35 255/40R17
Unfortunately the wheels have to go back on the racecar, so I'm going to get some 18's for the lexus. So looking to see if this set up will clear.
18.8.5 all the way arouaround with a 235/40R18
F-17x8 +32 225/45R17
R-17x8 +35 255/40R17
Unfortunately the wheels have to go back on the racecar, so I'm going to get some 18's for the lexus. So looking to see if this set up will clear.
18.8.5 all the way arouaround with a 235/40R18
#554
Which wheels????? Lol.
#555
Without further ado:
FR: 18x8.5 +35 235/40/18<br/>RR: 18x9.5 +40 265/35/18<br/>On General G-Max AS-03
Picture quality isn't so great but you can see the wheels a bit better. Fender gap look enormous here but its the lighting. There is actually less than a finger in front and back
Flushness of the rear wheel.
Flushness up front
FR: 18x8.5 +35 235/40/18<br/>RR: 18x9.5 +40 265/35/18<br/>On General G-Max AS-03
Picture quality isn't so great but you can see the wheels a bit better. Fender gap look enormous here but its the lighting. There is actually less than a finger in front and back
Flushness of the rear wheel.
Flushness up front