Parsa

any fender mods needed for this set up?

gerill2p

iTrader: (1)

Roll n fender work.

frostmica2

I recently purchased a 2008 Lexus IS250 Glacier Frost Mica RWD this week. The car previously had some work done but it's not really my style and there are some changes coming soon.

Here are some pictures of how I got it.
Up

Down

Suspension


Wheels are currently 20 inch Motiv Motion w/ 235/35 all around. I don't like the look, I am planning on getting a different set.
My plans so far for a budget set of wheels: (STR, Varrstoen)
Front - 19x9.5 +22 on 215/35 , Rear - 19x10.5 +22 on 235/35

The rears are shaved and the front is rolled I believe. The front fender will be fixed soon.
I have spent some time searching through this forum since I got the car, my question if you just got this car with the current suspension, what size tire/wheel specs would you run? I want to keep stock body...not run anything crazy but have a small stretch and sit flush and nice.

Parsa

how much did it need? my cars not slammed like yours and im interested in getting 18 wheels so I don't have rubbing issues. how much did all the fender work cost for you if you dont mind me asking? maybe its not that big of a deal and ill get 19s...

Silver09IS

Nah I'm running 19x9.5 & 19x10.5 +22 its flush cept cause im bagged I do have a rear camber kit

RobzKar

iTrader: (7)

Getting my setup ready. 19X11.5

Grizsk

I just bought a 350 with 285/25/20 on the rear, cant remember front width right now. After reading that most people opt for 235's all around, I'm thinking new wheels may be in order. Does anyone else here run 285's?

kwanye

iTrader: (4)

19x9.5/ 19x10.5

aandyxp

Hello I'm looking to buy te37
19x8.5 +22 215 35 19
19x9.5 +12 235 35 19

my rear fenders are rolled
i am on Bc coils right now .

will I need camber kit for my rear?

any help is appreciated

thanks

3ISFSPORT

kwanye

iTrader: (4)

aandyxp

you will probably need a rear camber kit or it will poke. Depending on how low you are you might have suspension travel clearance issues. When i was static, i was running 19x10.5 pretty slammed and i needed -5 degrees of camber to clear the lip and fender

Jay21

245/35/19 and 265/35/19, not sure wat the offset is, but i do scrape maybe too low and i do rub when turning, any tips?

bbaugher47

How you like those STRs??

eroids

few of my old set ups
SSR SP1 SBC 19x9.5 / 10.5
Work Meister 19x9.5 10.5

AG/WORK M560/Varianza 19x9.5 x11

work equip 19x10 / 11

BLAD350

20x9 255 20x11 325