FAQ: Official ISx50 NON-Nav to Nav Swap. Read this FIRST if you want to do the swap!
11-10-15, 11:29 PM
#91
I want to do the opposite lol
i have a navi that im trying to get rid off cus im doing a custom ipad install but im confuse as to if the plug for the ac will b the same or if i need to make any changes to it.
im gettin rid of the cd player and navi...also the radio on the non navi dash and ONLY keeping the AC functions.
What do i need to do to just keep the ac functions using the navi harness set up on the non navi harness set up.
PLEASEEEE HELPPPPP!!!!!
i have a navi that im trying to get rid off cus im doing a custom ipad install but im confuse as to if the plug for the ac will b the same or if i need to make any changes to it.
im gettin rid of the cd player and navi...also the radio on the non navi dash and ONLY keeping the AC functions.
What do i need to do to just keep the ac functions using the navi harness set up on the non navi harness set up.
PLEASEEEE HELPPPPP!!!!!
Sekohone, I'm sure u'll be able to find someone who is willing to swap with you... lol
There are plenty of people that wants to swap from non-NAVI to NAVI... including me!
Just create a post and i'm sure people will be drawn to you... like a moth to the flame
11-16-15, 08:38 AM
#93
10th Gear
Join Date: Jan 2015
Location: ca
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Non navi only has a couple of plugs and the navi one has like 10.
That's y I said I want to the the opposite from this post - I wanna go Navi to NonNavi.
11-22-15, 04:03 AM
#94
Driver School Candidate
Join Date: Nov 2015
Location: Scotland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys , I have a problem becouse I have bought satnav with ml and I'm not sure how to connect that. Also I don't know descriptions or names of the plugs like j66 etc. Could somebody identyfiy that for me please.
links to photos:
http://zapodaj.net/f559d1e7c9c57.jpg.html
http://zapodaj.net/358b60d4c5224.jpg.html
Thanks
links to photos:
http://zapodaj.net/f559d1e7c9c57.jpg.html
http://zapodaj.net/358b60d4c5224.jpg.html
Thanks
Last edited by Neuro22; 11-22-15 at 04:06 AM.
12-28-15, 11:22 AM
#96
Driver School Candidate
Join Date: Dec 2015
Location: Wellington
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help with connector name
What is the name of the connector in the picture that has the light blue plug at the upper unit and white plug at the lower unit, and what does it do?
12-28-15, 11:25 AM
#97
Driver School Candidate
Join Date: Dec 2015
Location: Wellington
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
connector labels
I am also missing that cable and have the same question. Can anyone let us know what the connector is called from the light blue socket, and what it does?
http://zapodaj.net/358b60d4c5224.jpg.html
http://zapodaj.net/358b60d4c5224.jpg.html
Hi guys , I have a problem becouse I have bought satnav with ml and I'm not sure how to connect that. Also I don't know descriptions or names of the plugs like j66 etc. Could somebody identyfiy that for me please.
links to photos:
http://zapodaj.net/f559d1e7c9c57.jpg.html
http://zapodaj.net/358b60d4c5224.jpg.html
Thanks
links to photos:
http://zapodaj.net/f559d1e7c9c57.jpg.html
http://zapodaj.net/358b60d4c5224.jpg.html
Thanks
02-20-16, 12:54 AM
#98
Driver School Candidate
Join Date: Feb 2016
Location: NY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How do I reach the guys you mentioned in your post?
I'm trying to convert a navi Mark Levinson gx470 to a non navi system. I have most things in place but the wiring is different for both vehicles.
You mentioned lexusaudio and one other gentleman. How can I reach them to get assistance?
JR
You mentioned lexusaudio and one other gentleman. How can I reach them to get assistance?
JR
01-18-17, 09:49 PM
#101
Driver School Candidate
Join Date: Jul 2014
Location: NSW
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hi From Australia,
I've managed to do the retrofit
Only two issues
I'm getting black/white vertical lines when attempting to go into NAV mode
Also, my source didn't come with a GPS antenna, can I buy a generic ebay GPS antenna? If so, where does the antenna plug into? (can't seem to find this in the instructions)
I've managed to do the retrofit
Only two issues
I'm getting black/white vertical lines when attempting to go into NAV mode
Also, my source didn't come with a GPS antenna, can I buy a generic ebay GPS antenna? If so, where does the antenna plug into? (can't seem to find this in the instructions)
01-20-17, 08:31 PM
#102
Generic antenna won't work cause of connector they are using. Lexus antenna is not that expensive. There is gray plug on the back of the unit connect to antenna - the only one could fit in there is antenna plug)
As for vertical line. Does it shows up in every mode or just the NAV? if only the Nav, i would check the connection again cause improper plugged in will cause same problem.
Hope it help.
As for vertical line. Does it shows up in every mode or just the NAV? if only the Nav, i would check the connection again cause improper plugged in will cause same problem.
Hope it help.
02-04-17, 01:41 AM
#103
Driver School Candidate
Join Date: Jul 2014
Location: NSW
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Whitebeast! useful information there..
I cut out most of the loom from the donor car, but I wasn't able to get the antenna under the dash. Could I just solder on a generic antenna to the plug?
Yeah, only during anything nav related, everything else looks fine. I'll check the connectors again, but was a little worried I may have not tapped a wire correctly, guess it's a little hard to diagnose
I cut out most of the loom from the donor car, but I wasn't able to get the antenna under the dash. Could I just solder on a generic antenna to the plug?
Yeah, only during anything nav related, everything else looks fine. I'll check the connectors again, but was a little worried I may have not tapped a wire correctly, guess it's a little hard to diagnose
02-06-17, 10:20 PM
#104
Ok, you may have 2 problem. Navigation connect to the screen using only one connector that the OP point out (one side has blue color and the other is white) that for video signal.
the second thing I would check is the MAP ECU itself
as for entenna
http://m.ebay.com/itm/2006-LEXUS-IS2...%257Ciid%253A2
if you need some picture of the connector I'm talking about. Let me know
the second thing I would check is the MAP ECU itself
as for entenna
http://m.ebay.com/itm/2006-LEXUS-IS2...%257Ciid%253A2
if you need some picture of the connector I'm talking about. Let me know
02-13-17, 03:35 AM
#105
Driver School Candidate
Join Date: Jul 2014
Location: NSW
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Ok, you may have 2 problem. Navigation connect to the screen using only one connector that the OP point out (one side has blue color and the other is white) that for video signal.
the second thing I would check is the MAP ECU itself
as for entenna
http://m.ebay.com/itm/2006-LEXUS-IS2...%257Ciid%253A2
if you need some picture of the connector I'm talking about. Let me know
the second thing I would check is the MAP ECU itself
as for entenna
http://m.ebay.com/itm/2006-LEXUS-IS2...%257Ciid%253A2
if you need some picture of the connector I'm talking about. Let me know
If you couod send soms pictures of the connector that would help alot! Im going to re check all my wire taps to make sure