FAQ: Official ISx50 NON-Nav to Nav Swap. Read this FIRST if you want to do the swap!
#79
Turkey Killer
iTrader: (5)
Join Date: Sep 2009
Location: CA
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tip on the Flyaudio - I really think I would want to go OEM though if I could...is this possible in an 09??? Everything else seems to be pre-wired...can't see why the nav wouldnt be. Thanks!
#84
Driver School Candidate
Join Date: Nov 2012
Location: Vic
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi There,
I've got an Australian 2010 IS250 that I was looking at doing this mod to. I recently found and purchased an ML unit on eBay which is out of an Australian ISF - not sure of the source year on this unit.
After receiving it, I had a look at the rear connectors which seem to be significantly different to those which are shown in this post.
I'm trying to ascertain if this is because the unit comes from a non-US build of if it's from a different year / revision, has anyone seen this before?
Thanks in Advance
I've got an Australian 2010 IS250 that I was looking at doing this mod to. I recently found and purchased an ML unit on eBay which is out of an Australian ISF - not sure of the source year on this unit.
After receiving it, I had a look at the rear connectors which seem to be significantly different to those which are shown in this post.
I'm trying to ascertain if this is because the unit comes from a non-US build of if it's from a different year / revision, has anyone seen this before?
Thanks in Advance
#85
Driver School Candidate
Join Date: Dec 2012
Location: sa
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi There,
I've got an Australian 2010 IS250 that I was looking at doing this mod to. I recently found and purchased an ML unit on eBay which is out of an Australian ISF - not sure of the source year on this unit.
After receiving it, I had a look at the rear connectors which seem to be significantly different to those which are shown in this post.
I'm trying to ascertain if this is because the unit comes from a non-US build of if it's from a different year / revision, has anyone seen this before?
Thanks in Advance
I've got an Australian 2010 IS250 that I was looking at doing this mod to. I recently found and purchased an ML unit on eBay which is out of an Australian ISF - not sure of the source year on this unit.
After receiving it, I had a look at the rear connectors which seem to be significantly different to those which are shown in this post.
I'm trying to ascertain if this is because the unit comes from a non-US build of if it's from a different year / revision, has anyone seen this before?
Thanks in Advance
Dear All
I just bought the same unit from ebay Adelaide Australia . Need to modify for install in my non nav is250 model 2005. Thanks
#86
Driver School Candidate
Join Date: Oct 2012
Location: CA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Harness
Is it the same process to conver a 2 gen. Gs also. Please let me know. Also I would likr to buy a extra harness if you have some.
#88
Hi!
I sourced the Nav system with both cables/connectors as shown below.
Where can I find the J53 plug that I think is needed? Also, besides the GPS antenna.... What else do I need to find?
Steering Controls? - http://is.sewellparts.com/accessorie...2008/6135.html
Microphone? - What would you guys recommend?
Thanks to all in advanced!
I sourced the Nav system with both cables/connectors as shown below.
Where can I find the J53 plug that I think is needed? Also, besides the GPS antenna.... What else do I need to find?
Steering Controls? - http://is.sewellparts.com/accessorie...2008/6135.html
Microphone? - What would you guys recommend?
Thanks to all in advanced!
#89
Driver School Candidate
Join Date: Jul 2015
Location: Surrey
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Sat nav retro fit
Hi! I'm new to this forum,I really need your help please! I'm stuck with the installation I did all wiring except the pink and red where to connect them, You mentioned j55 plug but I don't know which one is it! Thanks for your help!
#90
I want to do the opposite lol
i have a navi that im trying to get rid off cus im doing a custom ipad install but im confuse as to if the plug for the ac will b the same or if i need to make any changes to it.
im gettin rid of the cd player and navi...also the radio on the non navi dash and ONLY keeping the AC functions.
What do i need to do to just keep the ac functions using the navi harness set up on the non navi harness set up.
PLEASEEEE HELPPPPP!!!!!
i have a navi that im trying to get rid off cus im doing a custom ipad install but im confuse as to if the plug for the ac will b the same or if i need to make any changes to it.
im gettin rid of the cd player and navi...also the radio on the non navi dash and ONLY keeping the AC functions.
What do i need to do to just keep the ac functions using the navi harness set up on the non navi harness set up.
PLEASEEEE HELPPPPP!!!!!