searchdev

Hi there,

I recently ripped the passenger side bumper off my 2008 IS250. In fixing it, I see that the wires have been ripped out of the fog light connector.

The wires are just dangling there. I am wondering how to fix this. The connector looks fine. Can I just solder the wires back into the metal posts in the connector?

Also, does anyone know which wire is positive and which one is negative? I have green wire and a white wire with a black stripe.

The other option would be to have the wiring harness replaced but it seems like I must be able to fix this.

Thanks in advance for the help.

HAiS250

iTrader: (10)

Any pics? I have an extra connector if u decide to get one

searchdev

Here are some pics:

So I need to know how to connect and which wire is positive and which is negative.

Thanks!

iNfectious

iTrader: (6)

Have a voltmeter? Use it to check positive and negative. Or check the driver side wiring.

You should be able to de-pin the connector and solder them back.

liqB

You could just match the harness wiring on the opposite side fog light lamp, but honestly I believe whichever way you decide to rewire it it'll still power the bulb.

LexusKnown

Does anybody have a connector or where to get one? Mine also ripped

MikeFig82

iTrader: (13)

You can try AutoZone, and any other Auto Parts store. They should have a 9006 pigtails, or H11 depending on what year you have for the fogs.

XSV

iTrader: (1)

buy a new one from autozone and solder it tot he harness. I had to do this when my plug melted.