6lexis350

Does anybody know how to wire up a oem backup camera to the flyaudio? I tapped into the reverse camera to the wire labeled back on the flyaudio harness and put a video rca end on the camera wires and when i put it in reverse it says no video signal. Can somebody help me correct this? I appreciate it guys.

bob4256

iTrader: (17)

I would ask in the fly audio thread for some better responses.

Back when I had a FA unit, I bought a backup cam from eBay and wired it up to the unit and it worked

06pearlex

iTrader: (1)

Everything looks like its was wired correctly ...Make sure there's power from the reverse wire the yellow video wire is connected correctly.

monsterfa

old post but I have the same problem. No Video Signal. Were you able to fix this problem?

senxation

The camera you buy should have a wire that connects to the back of the fly audio, and one that is required to be tapped into a 12V so that when you shift into reverse, the camera is able to turn on. Without the connection of the 12V, the signal from the head unit a lot will not power the camera. So be sure to connect that 12V to something such as your break lights, and be sure to ground the other wire that came with the camera as well.

monsterfa

I am actually trying to connect the oem backup camera since I installed the fly audio into my is that had factory nav buy the only things that don't work are the hazard buttons and the backup camera when I go into reverse it just shows no video signal.