IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models
View Poll Results: How should I set up my LED lights? (in my headlights)
Just like OEM - dont make them flash, that's what turn signals are for!
11
55.00%
Make them flash and disable OEM orange turn signals
7
35.00%
Make them flash and make the OEM orange turn signals flash at the same time too
1
5.00%
Make them flash and alternate the turn signals
1
5.00%
Voters: 20. You may not vote on this poll

2012 Headlights - LED strip as a blinker?

Thread Tools
 
Search this Thread
 
Old 10-11-12, 06:25 AM
  #1  
runyun
Lead Lap
Thread Starter
iTrader: (11)
 
runyun's Avatar
 
Join Date: Sep 2004
Location: Dallas
Posts: 462
Likes: 0
Received 1 Like on 1 Post
Default 2012 Headlights - LED strip as a blinker?

Alright folks,

I'm pretty much done installing my 2012 headilghts. FYI, I did NOT know Sewell kits came prewired. The ones I bought were not prewired and it took a bit of testing to figure out which wires controlled the LED strip.


So far, I got them work like OEM (what I think is OEM):
1. When you turn on the parking lights, the LED strips turn on to 100% brightness
2. When you turn on the low beams, the LED strips dim down to 50% brightness

Moving on...
What do you guys think about using the LED strips as turn signals? (Like some Audi's)


EDIT: 10/11/12 @ nightime
Decided to be different for now, and make the LED's act like the turn signals + disabled orange turn signals. I'll eventually make it work like OEM, but for now, enjoy the pics.


Lights all off


Parking lights on. LED's at 100% bright


Low beams on, LED's at 50% bright


Video with hazards on (acts the same when you use it as TurnSignals)

Last edited by runyun; 10-11-12 at 08:07 PM.
Old 10-11-12, 06:50 AM
  #2  
silvaIS
Intermediate
iTrader: (2)
 
silvaIS's Avatar
 
Join Date: Oct 2008
Location: Staten Island NY
Posts: 470
Likes: 0
Received 10 Likes on 7 Posts
Default

the Audi does not use the LED strip as a turn signal. It turns it off and the orange blinker comes on. I think thats pretty ugly. I think the strip blinkinb could look interesting enough. I dont know how good that is for the life of it but again im not an expert in that field.

I have my lights set up to work at 100% brightness anytime the led is on, so i love it with or without headlights.
Old 10-11-12, 07:17 AM
  #3  
Vroomin350
Lexus Champion
iTrader: (28)
 
Vroomin350's Avatar
 
Join Date: Jan 2011
Location: SoFla
Posts: 4,265
Likes: 0
Received 1 Like on 1 Post
Default

interesting how you got them to go to 50% once you turn on your low beams. Mind sharing a picture of how you wired them?
Old 10-11-12, 07:32 AM
  #4  
runyun
Lead Lap
Thread Starter
iTrader: (11)
 
runyun's Avatar
 
Join Date: Sep 2004
Location: Dallas
Posts: 462
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by silvaIS
the Audi does not use the LED strip as a turn signal. It turns it off and the orange blinker comes on. I think thats pretty ugly. I think the strip blinkinb could look interesting enough. I dont know how good that is for the life of it but again im not an expert in that field.

I have my lights set up to work at 100% brightness anytime the led is on, so i love it with or without headlights.
I know not all AUDI's do it, but I have seen some that do here in Dallas. Now, I can't confirm if those AUDI owner's modified their cars - but that's where I got that idea.
Here's a vid I found on youtube... the LED's turn orange in this vid.. the ones I saw stayed white.



Originally Posted by Vroomin350
interesting how you got them to go to 50% once you turn on your low beams. Mind sharing a picture of how you wired them?
Here's the picture of the relays I used. To make them 50%, all you need is 1 relay (5 pin - far left relay in picture)
The other 2 relays in the picture were needed to make the LED strips flash. (Flash at 100% or at 50%... depending on if parking light is on or if lowbeam is on)

EDIT:
removed wire colors as it may differ and I don't want to be responsible for shortening your new headlights!
Basically, there are 3 wires that control your LED strip. Find them via test light


Last edited by runyun; 10-11-12 at 08:39 AM.
Old 10-11-12, 07:43 AM
  #5  
cyberscorp
Pole Position
 
cyberscorp's Avatar
 
Join Date: Nov 2008
Location: Toronto
Posts: 335
Likes: 0
Received 8 Likes on 5 Posts
Default

Subscribed . . .
Old 10-11-12, 11:55 AM
  #6  
stasis3131
Lead Lap
iTrader: (4)
 
stasis3131's Avatar
 
Join Date: May 2011
Location: tx
Posts: 721
Likes: 0
Received 0 Likes on 0 Posts
Default

Interesting ... I considered making my LEDs flash for signals but it's against the law here in Texas to have white lights as signals . We wouldn't pass inspection . unless you got the hook up. But nice wiring skills
Old 10-11-12, 12:17 PM
  #7  
runyun
Lead Lap
Thread Starter
iTrader: (11)
 
runyun's Avatar
 
Join Date: Sep 2004
Location: Dallas
Posts: 462
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by stasis3131
Interesting ... I considered making my LEDs flash for signals but it's against the law here in Texas to have white lights as signals . We wouldn't pass inspection . unless you got the hook up. But nice wiring skills
I'll have to disagree with you on that.
It's illegal to have WHITE light in the rear, but not in the front

§ 547.324. TURN SIGNAL LAMPS REQUIRED.
(d) A turn signal lamp shall emit:
(1) a white or amber light, or a color between white
and amber, if the lamp is mounted on the front of the vehicle; or
(2) a red or amber light, or a color between red and
amber, if the lamp is mounted on the rear of the vehicle.

http://www.txdps.state.tx.us/rsd/vi/...l/chapter4.htm
Section 20.29 if you need to check under "Details of Inspection."

Last edited by runyun; 10-11-12 at 12:23 PM.
Old 10-11-12, 12:25 PM
  #8  
cyberscorp
Pole Position
 
cyberscorp's Avatar
 
Join Date: Nov 2008
Location: Toronto
Posts: 335
Likes: 0
Received 8 Likes on 5 Posts
Default

DIY on wiring . . . ?
Old 10-11-12, 12:42 PM
  #9  
Kumar350
Lexus Test Driver
iTrader: (5)
 
Kumar350's Avatar
 
Join Date: Apr 2012
Location: Florida
Posts: 825
Likes: 0
Received 0 Likes on 0 Posts
Default

Subscribed .
Old 10-11-12, 12:46 PM
  #10  
bob4256
Lexus Champion
iTrader: (17)
 
bob4256's Avatar
 
Join Date: Sep 2010
Location: Weston, FL
Posts: 4,965
Likes: 0
Received 10 Likes on 6 Posts
Default

I would keep them oem
Old 10-11-12, 03:32 PM
  #11  
shadowman
Lexus Champion
iTrader: (2)
 
shadowman's Avatar
 
Join Date: Jun 2010
Location: CA
Posts: 2,258
Likes: 0
Received 1 Like on 1 Post
Default

Just a heads up...

You'll be opening a can of worm of Traffic TICKETS.

I believe DOT vehicle code mentioned that the front turn signals has to be AMBER. It's basically up to CHP or Police to enforce that.

Flashing white lights are reserved for EMERGENCY RESPONSE vehicles like Police cars, Ambulance, Fire trucks, etc...

That's why NO OEM has white signal turn lights
Old 10-11-12, 03:57 PM
  #12  
runyun
Lead Lap
Thread Starter
iTrader: (11)
 
runyun's Avatar
 
Join Date: Sep 2004
Location: Dallas
Posts: 462
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by shadowman
Just a heads up...

You'll be opening a can of worm of Traffic TICKETS.

I believe DOT vehicle code mentioned that the front turn signals has to be AMBER. It's basically up to CHP or Police to enforce that.

Flashing white lights are reserved for EMERGENCY RESPONSE vehicles like Police cars, Ambulance, Fire trucks, etc...

That's why NO OEM has white signal turn lights
Did you read my post #7?
I think it's legal here per our states website

EDIT:
Looks like white turn signals are LEGAL in CALI too!

http://www.dmv.ca.gov/pubs/vctop/d12/vc24953.htm

24953. (a) Any turn signal system used to give a signal of intention to turn right or left shall project a flashing white or amber light visible to the front and a flashing red or amber light visible to the rear.

Last edited by runyun; 10-11-12 at 05:38 PM.
Old 10-11-12, 07:31 PM
  #13  
B16da9
Racer
iTrader: (7)
 
B16da9's Avatar
 
Join Date: May 2009
Location: Miami
Posts: 1,882
Received 11 Likes on 9 Posts
Default

Originally Posted by Vroomin350
interesting how you got them to go to 50% once you turn on your low beams. Mind sharing a picture of how you wired them?
I have mine wired like that.
Old 10-11-12, 07:58 PM
  #14  
Rolando
Intermediate
 
Rolando's Avatar
 
Join Date: Aug 2009
Location: NY
Posts: 348
Received 3 Likes on 3 Posts
Default

damn i love it at 100 percent lol
Old 10-12-12, 10:39 AM
  #15  
L3XOTIC
Lexus Champion
 
L3XOTIC's Avatar
 
Join Date: Dec 2006
Location: BayArea2RockyMountains
Posts: 3,597
Likes: 0
Received 3 Likes on 3 Posts
Default

Very interesting concept. Looks amazing at 100% brightness. These LED headlights/bumper lights are being used by basically every car company now. I saw a new Honda accord this morning and it also had bumper LED's.


Quick Reply: 2012 Headlights - LED strip as a blinker?



All times are GMT -7. The time now is 12:59 AM.