Update On my IS300
03-26-14, 08:43 AM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2014
Location: nc
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Update On my IS300
So I haven't updated in a while. Here's what is going on. As everyone knows I have replaced the following and then began getting multiple misfire codes:
1. Valve Cover Gasket
2. Spark Plugs and wires
3. All Ignition Coil Packs
4. Throttle Position Sensor
5. Cam Sensor
6. Crank Sensor
After sitting at my dealership for a week, they fixed the timing issue and had to replace another part. I can now drive the car but it idles to high, and they are suggesting the idle air control valve be replaced. I am out of funds at this point to pay for a new one. Suggestions?
1. Valve Cover Gasket
2. Spark Plugs and wires
3. All Ignition Coil Packs
4. Throttle Position Sensor
5. Cam Sensor
6. Crank Sensor
After sitting at my dealership for a week, they fixed the timing issue and had to replace another part. I can now drive the car but it idles to high, and they are suggesting the idle air control valve be replaced. I am out of funds at this point to pay for a new one. Suggestions?
03-26-14, 11:02 PM
#2
Driver
iTrader: (1)
Join Date: Apr 2008
Location: Toronto
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
is there any other shops in your area that you can consult with? (The dealer will charge you an arm and a leg for anything to be looked at)
do you have the actual codes that we can reference?
do you have the actual codes that we can reference?
03-28-14, 06:42 AM
#5
Driver School Candidate
Thread Starter
Join Date: Feb 2014
Location: nc
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Parson
ES - 1st to 4th Gen (1990-2006)
5
07-05-17 08:49 PM
LScowboyLS
LS - 1st and 2nd Gen (1990-2000)
11
03-17-14 03:42 AM
