oil feed line for turbo HELP! - Club Lexus Forums

Log In 

oil feed line for turbo HELP!

Reply
 
 
 
Thread Tools Search this Thread
Old 03-21-14, 02:55 AM   #1
Marinecorp
Driver School Candidate
Thread Starter
 
Join Date: Mar 2013
Location: Florida
Posts: 42
Default oil feed line for turbo HELP!

so i don't know where to run an oil feed and return line to my turbo. I'm boosting the na motor so i need to know where to tap the oil and return it. guidance would help
Marinecorp is offline   Reply With Quote
Old 03-21-14, 10:01 AM   #2
AZTurbo
Lead Lap
iTrader: (10)
 
AZTurbo's Avatar
 
Join Date: Feb 2009
Location: Arizona
Posts: 402
Default

You will need a "T" off the block on the driver side where the factory oil pressure sensor is to get your oil feed.

You have a couple of options for oil drain;

1. Drill and Tap the upper oil pan where the factory TT oil drain is mounted.
2. Punch & Tap the lower oil pan.
AZTurbo is offline   Reply With Quote
Old 03-21-14, 12:19 PM   #3
Marinecorp
Driver School Candidate
Thread Starter
 
Join Date: Mar 2013
Location: Florida
Posts: 42
Default

As far as the debris, I have to drop the oil pan for that right? And I think I have to remove the cross member?
Marinecorp is offline   Reply With Quote
Old 03-22-14, 08:19 AM   #4
mitsuguy
Maintenance Moderator
iTrader: (2)
 
mitsuguy's Avatar
 
Join Date: May 2005
Location: AZ
Posts: 6,373
Default

Loosen motor mount bolts from underneath the car, jack up or use engine hoist to raise engine enough to get to the rear bolts on the lower oil pan... Then you can drill the upper oil pan with the motor still in the car... Just careful with aluminum shavings...
mitsuguy is offline   Reply With Quote
Old 03-28-14, 11:09 AM   #5
mecheng10
Lead Lap
 
Join Date: Aug 2013
Location: ohio
Posts: 476
Default

put a dab grease on the drill bit.
that helps to catch the shavings.
mecheng10 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Turbo oil starvation after oil change! rayzer57 NX Models (2015-present) 9 02-27-15 05:27 AM
CA Brand New 1JZ Single Turbo Oil line Kit-everything you need! Golden95SC SC400 / 300 Classifieds 16 11-20-14 06:32 PM
NA-T oil filter mount QWIKSTRIKE Performance & Maintenance 7 04-02-14 10:01 AM
is300 vvti 2jz into sc scott101 Performance & Maintenance 3 03-29-14 08:52 PM
hard oil feed line dawhorl21 Performance & Maintenance 9 05-15-13 05:42 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 10:24 AM.


Copyright © 2000-2016 Internet Brands, Inc. All Rights Reserved