IS3_FTW

iTrader: (3)

Sweet!!

I never had that problem when I disconnected the battery. I do own an 01 tho, so that might be another reasons. As the newer models had more issues

flavs23

well if u ever run into that problem for the driver window its easy. just hold the button down and continue holding for 3sec after the window is all the way down then hold up and continue holding for 3sec after the window is all the way up. and there u go u have auto/one touch up and down again.

IS3_FTW

iTrader: (3)

I just realized. I have an alarm with smart windows. lol

With this relay, I can 1 touch all my windows up and down with my master switch and on individual door switch's as well. So Im sure, the issue with the 1 touch windows does come across with disconnecting the battery, is the thing that I never had the experience of knowing.

Thanks Flav for the info

flavs23

ya no worries.

03LexIS300

Could be a dirty MAF sensor, or the hole machined in the aftermarket intake for the MAF may not be within specs to properly seal the MAF to the intake.