Trailer Hitch Ball Mount for Factory Receiver
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2015
Location: Missouri
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Trailer Hitch Ball Mount for Factory Receiver
Hi everyone. This is my first post. I recently purchased a 2010 GX 460 Premium and it came with the factory installed trailer hitch receiver. The same one you see on all the GX's. Has anyone ever purchased a reese ball mount (or another brand) for their GX? Or do I have to buy that short OEM ball mount that I have viewed online. It seems like the hitch pin hole is only about 2" from the edge of the opening and it does not give you enough room to slide the ball mount in before you have to line the holes up to install the pin. I bought a Reese Elite Towpower ball mount and put it in, aligned the holes and put the pin in, however most of the ball mount bar (long part) is sticking out. Any help is greatly apprieciated.
Thanks,
Broc
Thanks,
Broc
#2
Racer
Join Date: Dec 2003
Location: Palos Verdes, California
Posts: 1,669
Likes: 0
Received 4 Likes
on
4 Posts
Hi everyone. This is my first post. I recently purchased a 2010 GX 460 Premium and it came with the factory installed trailer hitch receiver. The same one you see on all the GX's. Has anyone ever purchased a reese ball mount (or another brand) for their GX? Or do I have to buy that short OEM ball mount that I have viewed online. It seems like the hitch pin hole is only about 2" from the edge of the opening and it does not give you enough room to slide the ball mount in before you have to line the holes up to install the pin. I bought a Reese Elite Towpower ball mount and put it in, aligned the holes and put the pin in, however most of the ball mount bar (long part) is sticking out. Any help is greatly apprieciated.
Thanks,
Broc
~ Cap
#3
Driver School Candidate
Thread Starter
Join Date: Jan 2015
Location: Missouri
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the reply. The holes do not even come close to lining up. Picture this. I put the ball mount in and push it all the way back to the spare tire. The hole on the ball mount is about 2" from the spare tire. The hole on my reciever is about 2" from the edge of where I insert the ball mount. For all intensive purposes the holes are about 5" or 6" away from each other. If I pull the ball mount out where the holes align, then 6" inches of the ball mount will be hangin out which does not work. Drilling a hole is not an option as I would have to take it somewhere to get it drilled. You cannot use a standard drill on these ball mounts. Surely I cannot be the only one with this problem. This is the same trailer hitch reciever that is on all the GX's out there. What ball mount do I need to buy?
Thanks,
Broc
Thanks,
Broc
#4
Mine came with a ball mount from Lexus that works fine and I also have a Reese Towpower 3 1/4" drop mount that works as well.
How heavy a trailer are you pulling? I'd think the Reese should work fine up to the trailer capacity of the GX.
How heavy a trailer are you pulling? I'd think the Reese should work fine up to the trailer capacity of the GX.
#5
Driver School Candidate
Thread Starter
Join Date: Jan 2015
Location: Missouri
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
http://lexus.sewellparts.com/accesso...2012/2448.html
Is this the ball mount that came from Lexus?
http://lexus.sewellparts.com/accesso...2010/4838.html
Is this similar to what yours looks like hooked up?
I originally bought a Reese Towpower Elite with a 3 1/4" drop, however it stuck out way to far compared to the link above.
I guess I just need to buy one that is shorter overall.
Thread
Thread Starter
Forum
Replies
Last Post