GX - 2nd Gen (2010-2023) Discussion topics related to the 2010 + GX460 models

Driver Support Package

Thread Tools
 
Search this Thread
 
Old 07-28-14, 03:27 PM
  #1  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default Driver support package

so i am trying to figure out how to turn on the PCS.
page 358 of manual says there is a button below steering wheel on right
i see no such button.

Also, how is the driver attention monitor turned on?
Old 07-28-14, 07:12 PM
  #2  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

well, i guess i have to wait for dealer to return my call.
Old 07-28-14, 07:40 PM
  #3  
Lolrax
Intermediate
 
Lolrax's Avatar
 
Join Date: Sep 2013
Location: AB
Posts: 273
Received 14 Likes on 11 Posts
Default

Yo! It's just permanently on for me. I went through every menu and never found a toggle. Then one day it just came on when I was making a shady high speed lane change
Old 07-28-14, 07:54 PM
  #4  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

Originally Posted by Lolrax
Yo! It's just permanently on for me. I went through every menu and never found a toggle. Then one day it just came on when I was making a shady high speed lane change
i think my dealer said it only works above 20 -30 mph, but there should be a PCS light up somewhere right if its on? I think you are right. Why does manual say there is a switch then?
Old 07-28-14, 08:15 PM
  #5  
Lolrax
Intermediate
 
Lolrax's Avatar
 
Join Date: Sep 2013
Location: AB
Posts: 273
Received 14 Likes on 11 Posts
Default

That's right!!! You just reminded me, I took a picture for you. It's in the drivers side front footwell under the dash kinda in the middle. Here is what the switch looks like
Attached Thumbnails Driver Support Package-image.jpg  
Old 07-28-14, 08:42 PM
  #6  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

thanks. i will look for it tomorrow.

so PCS is always on and nothing shows up on dash like PA, BSM, LDA, etc...?
Old 07-28-14, 09:26 PM
  #7  
Lolrax
Intermediate
 
Lolrax's Avatar
 
Join Date: Sep 2013
Location: AB
Posts: 273
Received 14 Likes on 11 Posts
Cool

That's correct, it will notify you with a light on the dash if it is disabled via that button however. LDA should come up with an animation in the center LCD, when it is activated via your steering wheel control. It's a picture like two lines.

I don't have BSM so I have no idea. PA it's a picture of a parking cone with sonar things on it that comes up as an orange icon on your dash

Last edited by Lolrax; 07-28-14 at 09:30 PM.
Old 07-29-14, 07:15 AM
  #8  
Randy B
Advanced
 
Randy B's Avatar
 
Join Date: Jun 2007
Location: Florida
Posts: 629
Received 80 Likes on 55 Posts
Default T4:

The LDA, comes on only when it is selected by the toggle switch on the right side of the steering wheel (Button says LDA). it will illuminate two lights on the MID between the MPH and the RPMs. The PCS will only illuminate a PCS light on the dash, when it is activated. You will also get a nasty chime from the dash, and an animiated "BRAKE!" in the MID.

As for the Radar cruise control, you set that wit hthe button to the right of the LDA on the steering wheel for preset distance control. You have to turn on the cruise though wit the cruise stalk. If you want to use regular cruise control without radar control, as soon as you turn on the cruise, push the stalk forward for a count of two and you will see the radar ready dissappear, and change to traditional cruise control. The icon also change in the lwoer right pod of the dash.

The BSM is toggled on and off through the MID menu. When it is on, a green light illuminates in the left pod that says BSM. You will then see the lights on and off in the mirrors as they indicate something.

Randy B
Old 07-29-14, 09:19 AM
  #9  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

thanks guys.
I found the PCS button. Wasnt turned on, and very very hard to see.
I pushed button in, and now PCS light is showing up on cluster.

Thanks Randy and Lorax
Old 07-29-14, 12:01 PM
  #10  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

so i drove around today, and tried to fool it into thinking i would rear end or crash into something, but it never went off. Had to brake before i really crashed...When does it activate? I guess its smarter than us...
Old 07-29-14, 01:30 PM
  #11  
Lolrax
Intermediate
 
Lolrax's Avatar
 
Join Date: Sep 2013
Location: AB
Posts: 273
Received 14 Likes on 11 Posts
Default

Originally Posted by T4Fun
so i drove around today, and tried to fool it into thinking i would rear end or crash into something, but it never went off. Had to brake before i really crashed...When does it activate? I guess its smarter than us...
If the PCS light is on, the system is OFF. If the PCS light is off, PCS is ON. I think that is why its so hidden so it doesn't get accidentally deactivated.

Backwards as hell I know
Old 07-29-14, 07:33 PM
  #12  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

Originally Posted by Lolrax
If the PCS light is on, the system is OFF. If the PCS light is off, PCS is ON. I think that is why its so hidden so it doesn't get accidentally deactivated.

Backwards as hell I know
very confusing. So button is not pushed in now.
indeed it is backwards. I read manual again..."The "PCS" warning light turns ON when pre-collision braking is DISABLED."
Old 07-29-14, 11:51 PM
  #13  
Lolrax
Intermediate
 
Lolrax's Avatar
 
Join Date: Sep 2013
Location: AB
Posts: 273
Received 14 Likes on 11 Posts
Default

Originally Posted by T4Fun
very confusing. So button is not pushed in now.
indeed it is backwards. I read manual again..."The "PCS" warning light turns ON when pre-collision braking is DISABLED."
Yes, I kind of prefer it that way because I don't really want orange lights all over my dash anyways.
Old 07-30-14, 08:48 AM
  #14  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

tested it out and tried to mimick impending collision, and it did work. PCS flashed and BRAKE came up on dash

Last edited by T4Fun; 08-20-14 at 02:41 PM.
Old 08-20-14, 02:39 PM
  #15  
T4Fun
Racer
Thread Starter
 
T4Fun's Avatar
 
Join Date: Apr 2010
Location: Pennsylvania
Posts: 1,757
Received 33 Likes on 31 Posts
Default

tested out again today. Didnt stop for vehicle in front going about 35 mph. No warning this time and it applied the brakes and slowed gx down but didnt stop it. I had my foot on brake ready the whole time. I had no intention on letting it get to that point, but the gx beat me to the punch... Subarus eyesight stops their vehicles completely, why not on our lexus i have no clue...


Quick Reply: Driver Support Package



All times are GMT -7. The time now is 10:38 PM.