5k vs 6k VLeds?
#16
Thanks Tecman, i just pop out the dome light covers, and noticed all the bulbs point down, therefore, i order 3 sets of these bulbs http://www.vleds.com/shop-bulb-numbe...58-1-pair.html for dome lights
2 set of flank type bulbs for four doors http://www.vleds.com/shop-bulb-numbe.../5k-4-hpf.html
And 2 sets for running board http://www.vleds.com/shop-bulb-numbe...-led/6-5k.html
And 921 for back up, and i choose 5k, since i already have 6k to compare with one i like it better
http://www.vleds.com/shop-bulb-numbe...79-1-pair.html
2 set of flank type bulbs for four doors http://www.vleds.com/shop-bulb-numbe.../5k-4-hpf.html
And 2 sets for running board http://www.vleds.com/shop-bulb-numbe...-led/6-5k.html
And 921 for back up, and i choose 5k, since i already have 6k to compare with one i like it better
http://www.vleds.com/shop-bulb-numbe...79-1-pair.html
#17
Racer
Thanks Tecman, i just pop out the dome light covers, and noticed all the bulbs point down, therefore, i order 3 sets of these bulbs http://www.vleds.com/shop-bulb-numbe...58-1-pair.html for dome lights
2 set of flank type bulbs for four doors http://www.vleds.com/shop-bulb-numbe.../5k-4-hpf.html
And 2 sets for running board http://www.vleds.com/shop-bulb-numbe...-led/6-5k.html
And 921 for back up, and i choose 5k, since i already have 6k to compare with one i like it better
http://www.vleds.com/shop-bulb-numbe...79-1-pair.html
2 set of flank type bulbs for four doors http://www.vleds.com/shop-bulb-numbe.../5k-4-hpf.html
And 2 sets for running board http://www.vleds.com/shop-bulb-numbe...-led/6-5k.html
And 921 for back up, and i choose 5k, since i already have 6k to compare with one i like it better
http://www.vleds.com/shop-bulb-numbe...79-1-pair.html
#22
I put these in our GX about a month ago. It's hard to get the coloring to really show.
I'm not totally in love with it with the Sepia interior, but I don't plan on changing it back.
For those of you who're wondering all you need are 16x T10 wedge bulbs.
I'm not totally in love with it with the Sepia interior, but I don't plan on changing it back.
For those of you who're wondering all you need are 16x T10 wedge bulbs.
#23
Driver School Candidate
Join Date: Sep 2013
Location: ND
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
2013 GX460 bulb list, should be the same for the 2014 and older same gen cycle.
Back Up Light Bulb - 921
Courtesy Light Bulb - 168
Daytime Running Light Bulb - 9005
Dome Light Bulb - 168
Fog Light Bulb - H11
High Beam Headlight Bulb - 9005
Low Beam Headlight Bulb - H11
Map Light Bulb - 168
Parking Light Bulb - 168
Front Side Marker Light Bulb - 168
Rear Side Marker Light Bulb - 168
Rear Turn Signal Light Bulb - 7440A
Front Turn Signal Light Bulb - 7440A
Vanity Mirror Light Bulb - 175
Back Up Light Bulb - 921
Courtesy Light Bulb - 168
Daytime Running Light Bulb - 9005
Dome Light Bulb - 168
Fog Light Bulb - H11
High Beam Headlight Bulb - 9005
Low Beam Headlight Bulb - H11
Map Light Bulb - 168
Parking Light Bulb - 168
Front Side Marker Light Bulb - 168
Rear Side Marker Light Bulb - 168
Rear Turn Signal Light Bulb - 7440A
Front Turn Signal Light Bulb - 7440A
Vanity Mirror Light Bulb - 175
#24
Racer
i am replacing the high beam halogen with this led light...
http://www.ebay.com/itm/121340946884...84.m1497.l2649
http://www.ebay.com/itm/121340946884...84.m1497.l2649
Last edited by T4Fun; 08-05-14 at 09:10 AM.
#25
i am replacing the high beam halogen with this led light...
http://www.ebay.com/itm/121340946884...84.m1497.l2649
http://www.ebay.com/itm/121340946884...84.m1497.l2649
Amazing that those two little leds put out 2400 lumen!
#26
3UZ-FEEEE
iTrader: (2)
i am replacing the high beam halogen with this led light...
http://www.ebay.com/itm/121340946884...84.m1497.l2649
http://www.ebay.com/itm/121340946884...84.m1497.l2649
yes sir.
#27
Racer
problem is the base heat sink too big and the cap on the back of headlight
housing wont fit with this. Just wasted about $70. I can put it in, but i am sure
the screw cap is back there for a reason.
anyone else have any other H9 highbeam LEDS to try out? Make sure base fits
inside housing and you can screw cap back on. I'll post pics
#29
It doesn't look like that shallow housing will allow any LEDs to be added. If you recall 2010 through 2013 only had the housing on the low beam and it was full of room so I was able to get everything inside of it on the low beams but I do not have a housing on the high beams or the fog lights. The problem with high output LEDs is that they require a heat sink which is quite large. Pic below is my low beams and fogs with a ballast.
#30
Racer
heres a very cheap solution for upgrading to leds inside
Thread
Thread Starter
Forum
Replies
Last Post
pfdaxe
IS - 2nd Gen (2006-2013)
25
02-28-11 08:12 AM