XenonDepot

iTrader: (11)

Hi Guys,

If anyone has a GX 460 with halogen headlights and is interested in upgrading to HID using an HID kit please let me know. We would like to work with a forum member that is interested in putting together a detailed DIY guide similar to the ones found on our HID Kit Testimonials Page.

Steve

bamaboy007

what do you want me to do? and I'll do it

XenonDepot

iTrader: (11)

Hi,

We are looking to work with a forum member who is interested in installing an HID kit in the GX 460. In exchange for a discounted price, we would like the customer to post up an informative thread showing how they installed the kit, before/after comparison shots, and some non biased feedback of the product.

Please take a look at the testimonials page on our website to get an idea of what we are looking for (some are more detailed then others).

Steve

bamaboy007

yep i'll do that for you, my GX is coming in next week around the 11th then i can change them out and do a good write up for you.

XenonDepot

iTrader: (11)

Awesome! Please let me know when you get it so we can coordinate.

Steve

bamaboy007

I hope to pick it up on sat if it does come in today or tomorrow.

XenonDepot

iTrader: (11)

Sweet! You must be so excited. Please keep me in the loop.

Looking forward to working with you.

Steve

EyeKutr

iTrader: (5)

Steve
does the new GX still use h11 bulbs in the non HID car?

Luke27617

iTrader: (2)

Steve,

Just sent you a PM.

XenonDepot

iTrader: (11)

EyeKutr,

I believe it does. I don't have a 2010 application guide yet so hoping you guys could shed some light on that.

Luke27617 - Replied :-)

Steve

antonio98

Yes, it uses 55W H11 halogen bulbs for the low beams.

bamaboy007

Picked up my ride yesterday so I'm ready to get started

Luke27617

iTrader: (2)

I have took closer look today and the install will require dust lid modification as the bulb is inside protected.

ybing

I think all aftermarket HID install will require u to drill a hole on the dust cover, I think now there is dust cover on every Lexus car

XenonDepot

iTrader: (11)

Hi,

That is correct. You would need to drill a hole through the dustcover in order to run the wire going from the bulb to the ballast. Our bulbs will have a grommet on the wires though so that you can reseal the headlight.

Steve