Got this fron the dealer the other day. You can set the following auto door locking and unlocking functions. All times must be EXACT or it will not work.
(a) Locking linked with the shift position
All the dooor are locked automatically when the selector lever is moved out of the "P" position with the ignition switch in the "ON" position. This is suppose to be the default setting for new vehicles.
(b) Unlocking linked with the shift position
All the door are unlocked automatically when the selector lever is moved to the "P" position with the switch in the "ON" position.
(c) Locking linked with the vehicle speed
All the doors are automatically locked when the vehicle speed reached 12 mph or higher. However, if any door is unlocked during driving, the auto function will not operate until the unlocked door is opened once.
(d) All the doors are unlocked automatically when the driver's door is opened within 10 seconds after the ignition switch is turned from "ON" to the "ACC" or "LOCK" position.
Setting the functions
1. Close all the doors.
2. Turn the ignition switch to the "ON" position.
3. Within 10 seconds after the ignition switch is turned to the "ON" position;
+To set function (a)
Push and hold the front of the power door lock switch for 5 seconds with the selector lever in the "P" position.
+To set function (b)
Push and hold the rear of the power door lock switch for 5 seconds with the selector switch in the "P" position.
+To set fuction (c)
Push and hold the front of the power door lock switch for 5 seconds with the selector switch in any position except "P".
+To set function (d)
Push and hold the rear of the power door lock switch for 5 seconds with the selector switch in any position except "P".
All the doors are automatically locked and unlocked when you release the power door lock switch. This indicates that the functions is set. If all the doors do not lock and unlock, the time the switch was held may have been too short or too long. Perform the procedure over again starting at step 1.
If you want to cancel a function, repeat the procedure. Each time you perform the procedure, the function is set or cancelled.
This ad is not displayed to registered members. Register your free account today and become a member on Club Lexus!
Hey thanks so much for posting that! It drives me crazy to have to constantly remember to unlock every one else's door after turning off the car. It will be wonderful to set it where they all unlock at the same time.
Appreciate the info!
Sand Dollar Pearl
Gold Emblem Package
If you don't make it very close to 5 seconds, it will not work. The trick I used was to watch the blinking : on the clock. As soon as I held the lock down, the first : blink thereafter was 1 and so on till 5. That works on the mark. Till then, I must have tried 10 times with no success.
The information regarding setting the options on for the door lock function was VERY helpful. I have been trying to get this information from my dealer and the only answer I ever got was to bring it in for a service appointment. Also, I purchased the 2 volume repair manual and it outlined what the various options were, but NOT how to change them. Needless to say I was very disappointed after I spent $300 on the manuals - but I'm sure they'll come in handy for something else.
I was wondering if anyone knows how to disable the auto-tilt and telescope function of the steering wheel when the key is inserted? This is an annoyance to me. Once again, the shop manual says it can be disabled, but now how. Anyone know of a friendly dealer that's willing to provide this information?
I was hoping to be able to disable the auto-tilt/telescope function without taking the car back to the dealer. I wonder if this is possible? All I heard from them when I wanted to disable to auto door lock function was that only the dealer could do it - until I read the excellent post from Kbach.