03 Lexus GX 470 Radiator Replace
#4
Lexus Champion
If you're going to do it yourself I would definintly buy a remote clamp removal tool. It's hard to get to the bottom clamp even when underneath the engine bay.
.
#5
See attached PDF....
If you're going to do it yourself I would definintly buy a remote clamp removal tool. It's hard to get to the bottom clamp even when underneath the engine bay.
Amazon.com: OTC 4525 Cable-Type Flexible Hose Clamp Pliers: Automotive
.
If you're going to do it yourself I would definintly buy a remote clamp removal tool. It's hard to get to the bottom clamp even when underneath the engine bay.
Amazon.com: OTC 4525 Cable-Type Flexible Hose Clamp Pliers: Automotive
.
The whole install went pretty easy with basic tools. Also make sure you have about 18" worth of extensions to get to the bottom bolts that hold the radiator. They also need to be backed up with a wrench. Overall with a coolant flush took me about two hours.
#7
Almost none, It all drained back into the tranny. I would say it was maybe 2 to 3 ounces at most. If you don't need to do a flush it only takes about a gallon and a half of coolant to fill it back up.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post