GX - 1st Gen (2004-2009) Discussion topics related to the 2003 -2009 GX470 models

Nozzle Cuts Off when Pumping Gas

Thread Tools
 
Search this Thread
 
Old 01-04-14, 06:43 AM
  #1  
Negrodamus
Driver School Candidate
Thread Starter
 
Negrodamus's Avatar
 
Join Date: Jan 2014
Location: California
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Nozzle Cuts Off when Pumping Gas

2005 GX470

My Issue is that when I pump Gas ONLY in Calif it keeps stopping. I have tried all angles of the pump. I have tried holding back rubber on pump, but that will not help. This is something else. I have been to other states such as TX AZ NM & NV and this problem does not exist.

Has anyone had the same or similar problem that had to get it serviced? What was the outcome? Any true knowledgeable Mechanics on here that actually know why this is happening?
Old 01-05-14, 09:27 AM
  #2  
UpStarr
Pit Crew
 
UpStarr's Avatar
 
Join Date: Dec 2013
Location: SW
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default

Only in California It's designed to be pressure sensitive to backflow and then it is suppoed to cut off, but to hear you say its only in Cali is weird Good luck
Old 01-05-14, 10:34 AM
  #3  
IanB2
Pole Position
 
IanB2's Avatar
 
Join Date: Feb 2013
Location: WPG, MB
Posts: 2,303
Received 520 Likes on 433 Posts
Default

I pull the nozzle back out of the filler an inch or so, and find the problem is mostly resolved.
Old 01-05-14, 11:27 PM
  #4  
andreys
Pole Position
 
andreys's Avatar
 
Join Date: Jun 2007
Location: Arizona
Posts: 226
Likes: 0
Received 6 Likes on 3 Posts
Default

Originally Posted by IanB2
I pull the nozzle back out of the filler an inch or so, and find the problem is mostly resolved.
I usually just lift up a nozzle slightly (in the back), it works that way.
Old 01-06-14, 01:53 PM
  #5  
lesz
Lead Lap
 
lesz's Avatar
 
Join Date: Aug 2013
Location: Illinois
Posts: 4,279
Received 1,010 Likes on 691 Posts
Default

Like some of the others, I find that holding the gas pump nozzle out an inch or so from being completely inserted solves the problem.

Also, though, on the ES forum, someone who had a similar issue with his ES reported that the dealership service department eventually discovered that there was a cap from a fuel additive that had fallen into the neck of the tank, and that was causing the pumps' auto shut off mechanism to mistakenly think that the tank was full.
Old 01-06-14, 02:12 PM
  #6  
shyguyF
Lead Lap
 
shyguyF's Avatar
 
Join Date: Oct 2012
Location: il
Posts: 552
Received 9 Likes on 9 Posts
Default

It happened to my GX too but only at the one gas station that on the way to go to work., it"s weird and works fine to the other stations. I do not know the problems b/t my truck and the gas pump.
Old 01-10-14, 10:29 AM
  #7  
danmm7
Driver
 
danmm7's Avatar
 
Join Date: Aug 2012
Location: CA
Posts: 158
Received 4 Likes on 3 Posts
Default

I have also experienced this same problem at more than one gas station.
It does not happen all the time, but it happens often enough to make me wonder what is wrong with my GX gas tank filler tube. Maybe it is not breathing properly? Some breather hose being clogged?

And, yes, i live in California too. Never tried pumping gas in the GX in another state.
Old 01-17-14, 11:03 AM
  #8  
Negrodamus
Driver School Candidate
Thread Starter
 
Negrodamus's Avatar
 
Join Date: Jan 2014
Location: California
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Moving the Nozzle back an inch just didn't work. I went to a service place and they took it apart and cleaned the Filter. I actually tested it and it seems to work Ok but not on Full Blast.. but faster then it has in a long time.
Old 01-17-14, 11:27 AM
  #9  
andreys
Pole Position
 
andreys's Avatar
 
Join Date: Jun 2007
Location: Arizona
Posts: 226
Likes: 0
Received 6 Likes on 3 Posts
Default

Originally Posted by Negrodamus
Moving the Nozzle back an inch just didn't work. I went to a service place and they took it apart and cleaned the Filter. I actually tested it and it seems to work Ok but not on Full Blast.. but faster then it has in a long time.
You mean cleaned fuel filter? That's strange, since fuel has absolutely nothing to do with pumping gas. As others have mentioned, the issue with gas nozzles in CA...
Old 01-17-14, 12:36 PM
  #10  
RCsGX
Lexus Champion
 
RCsGX's Avatar
 
Join Date: Mar 2012
Location: ★ᚱᚱ²²★
Posts: 1,812
Likes: 0
Received 13 Likes on 12 Posts
Default

^ I think the OP meant filler, not filter. Like you said a fuel filter has no bearing on how the gas comes out of the pump.

Or maybe the OP means the gas station changed their filters....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
way2lo
ES - 1st to 4th Gen (1990-2006)
5
09-16-17 07:02 AM
kenjh
LS - 3rd Gen (2001-2006)
14
03-20-17 04:09 PM
Maxwell45
Hybrid Technology
3
09-26-11 09:15 AM
YWW
GS - 2nd Gen (1998-2005)
4
08-30-10 07:46 PM
Toaster
SC- 1st Gen (1992-2000)
15
05-12-07 09:52 AM



Quick Reply: Nozzle Cuts Off when Pumping Gas



All times are GMT -7. The time now is 12:29 AM.