Go Back   Club Lexus Forums > Lexus Model Forums > GX Models > GX - First Generation
Sign in using an external account
Register Forgot Password?

Different and transfer case fluid change

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 04-05-08, 10:56 PM   #1
brickauto
Driver
Trader Score: (0)
 
brickauto's Avatar
 
Join Date: Aug 2007
Location: OH
Posts: 129
Default Different and transfer case fluid change

Just replaced my front + rear diff and transfer case fluids to Amsoil Severe Gear 75W90 at 59k miles.

The rear diff and transfer case drain and fill plugs are obvious, the front diff plug can be accessed after removing the skid plate beneath the oil pan.

Front diff and transfer case takes 1.5qts

Rear diff takes 3.2qts
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
brickauto is offline   Reply With Quote
Old 04-07-08, 11:40 AM   #2
jditom
Pole Position
Trader Score: (0)
 
Join Date: Oct 2007
Location: OR
Posts: 302
Default

Good stuff!

How did your fluid look at 59K?

Was this the first change?
__________________
2007 RX400h
jditom is offline   Reply With Quote
Old 04-07-08, 04:13 PM   #3
schan1w
Driver
Trader Score: (0)
 
Join Date: Apr 2006
Location: NY
Posts: 115
Default

Can you share some details about the procedure? Did you need to jack up the truck? Also, did you use 6pt or 12pt socket? I understand these can get rusted on pretty tight. 12pt might make it easier to access w/o raising the truck, but might round off the bolt. I was planning on doing mine at 30K miles.
schan1w is offline   Reply With Quote
Old 04-07-08, 06:41 PM   #4
brickauto
Driver
Trader Score: (0)
 
brickauto's Avatar
 
Join Date: Aug 2007
Location: OH
Posts: 129
Default

jditom, I bought the truck used at 51k, this is the first change during my ownership, the fluids didn't look too bad so I reckoned the previous owner had it changed at least once.

I had the entire truck raised, fronts up a pair of Rhino ramps and I jacked up the rear on the rear diff housing before sitting the rear axle on a pair of jack stands.

I would highly recommend raising the truck for room to work especially at the transfer case and front diff, more room for arm motion when doing manual pumping during the refill of gear lube.

Then I used 6pt sockets to remove the rear diff and transfer case fill and drain plugs. I used a socketed allen key for the front diff plugs.
brickauto is offline   Reply With Quote
Old 04-07-08, 06:43 PM   #5
brickauto
Driver
Trader Score: (0)
 
brickauto's Avatar
 
Join Date: Aug 2007
Location: OH
Posts: 129
Default

One more thing, here are the plug torque figures I got from the service manual:

Front Diff plugs: 29 ft-lb
Transfer case plugs: 27 ft-lb
Rear Diff plugs: 36 ft-lb
brickauto is offline   Reply With Quote
Old 04-07-08, 06:43 PM
 
 
 
 
Reply

Tags
330xi, 350, 470, case, change, fluid, fuild, gear, gx470, lexus, lube, lx470, maintenace, rx, transfer

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

All times are GMT -7. The time now is 01:37 PM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info

Content Relevant URLs by vBSEO 3.5.2