Lift is done!!
#17
Lead Lap
Thread Starter
#18
#19
#22
Racer
Join Date: Dec 2003
Location: Palos Verdes, California
Posts: 1,669
Likes: 0
Received 4 Likes
on
4 Posts
Jason.....
Are your spacers the same as these ??
If not, how are they different ??
http://www.fourwheeler.com/projectbuild/129_0407_2004_lexus_gx470_customization/photo_10.html
~ Cap
Are your spacers the same as these ??
If not, how are they different ??
http://www.fourwheeler.com/projectbuild/129_0407_2004_lexus_gx470_customization/photo_10.html
~ Cap
#23
Lead Lap
Thread Starter
Hey Cap,
The spacer is like the ones you would find for a 4Runner spacer lift. The spacer goes in between the top of your spring and the suspension top mount.
In the picture above, Fourwheeler did not do their homework and came up with a very unrealistic way to lift the front.
The spacer is like the ones you would find for a 4Runner spacer lift. The spacer goes in between the top of your spring and the suspension top mount.
In the picture above, Fourwheeler did not do their homework and came up with a very unrealistic way to lift the front.
#28
Driver School Candidate
Join Date: Jul 2009
Location: MT
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Jason, I sent you and email through your site, but could you PM me some details on these?
And to the OP - can you provide any more info on what you did to the rear brackets?
And to the OP - can you provide any more info on what you did to the rear brackets?
Last edited by OffsetZ33; 07-19-09 at 04:37 PM.
#29
Lead Lap
Thread Starter
Still here Jason.
OffsetZ33- The front spacers are from Jason B of Burtmanindustries.com
the rear has gone through a change. I originally had little brackets to make the rear bags think they're too low. But since then i have ditched the brackets and just extended the mini tie-rod joints (as they are adjustable).
OffsetZ33- The front spacers are from Jason B of Burtmanindustries.com
the rear has gone through a change. I originally had little brackets to make the rear bags think they're too low. But since then i have ditched the brackets and just extended the mini tie-rod joints (as they are adjustable).