First Project BMW OEM Led fogs
#1
First Project BMW OEM Led fogs
I am going to give these a try in the OE fog light locations.
It looks like the should be a close fit and possibly can plug and play H11.
The mounting points may not be perfect but should be fair close.
http://www.theretrofitsource.com/clo...l#.VKnha_ldVUc
Tech Specs
Dimensions of Housing
Depth:131mm
Width:147mm
Height:142mm
Diameter (of bumper opening needed)95mm H x 102mm W (oval shape)
Dimensions of Internal Components
Depth:92mm
Width:85mm
Height:75mm
Diameter (of components from front):74mm H x 77mm W (oval shape)
It looks like the should be a close fit and possibly can plug and play H11.
The mounting points may not be perfect but should be fair close.
http://www.theretrofitsource.com/clo...l#.VKnha_ldVUc
Tech Specs
Dimensions of Housing
Depth:131mm
Width:147mm
Height:142mm
Diameter (of bumper opening needed)95mm H x 102mm W (oval shape)
Dimensions of Internal Components
Depth:92mm
Width:85mm
Height:75mm
Diameter (of components from front):74mm H x 77mm W (oval shape)
#3
Racer
i thought about swapping out my leds for some brighter fogs, but these led fogs have
self leveling mechanism making them quite unique, so i kept them on. they are bright enough
for me. The led lights are like lasers at night. All signs are lit up in bluish hue. love it
self leveling mechanism making them quite unique, so i kept them on. they are bright enough
for me. The led lights are like lasers at night. All signs are lit up in bluish hue. love it
Trending Topics
#9
#10
I would only suggest doing this project if you have done a headlight retro fit or are a skilled craftsman
I had to cut apart the BMW lights completely and shave them down slightly. Then had to open the factory foglights and trim the internals of those as well.
Output of lights has always been a tough one for me, its hard to truly capture it. If you google these lights you can see the output.
I had to cut apart the BMW lights completely and shave them down slightly. Then had to open the factory foglights and trim the internals of those as well.
Output of lights has always been a tough one for me, its hard to truly capture it. If you google these lights you can see the output.
#15
Pole Position
Sorry for resurrecting an old thread, but the retrofit source makes LED projector fogs that are plug and play for our cars now. I thought I would update this thread in case anyone was looking for LED fogs.
https://www.theretrofitsource.com/as...to-xb-led.html
https://www.theretrofitsource.com/as...to-xb-led.html
The following users liked this post:
Acrad (07-15-17)