What tread depth difference is acceptable?
#1
Driver School Candidate
Thread Starter
What tread depth difference is acceptable?
Hi all, looking at the tread depth on all the tires of our new to us GX. Tires measure pretty evenly all around at 6/32". Spare measure at 9/32". Stock tread depth for the tire per tire rack is 10/32". So it appears that out of the 3 tire rotations the vehicle had, they only rotated the spare once.
So my question is is 3/32" or 2.5mm too much difference to go ahead and start rotating in the spare to even out wear? I'm concerned about uneven tire diameters and unnecessary wear on the driveline and differentials. Would appreciate your thoughts.
So my question is is 3/32" or 2.5mm too much difference to go ahead and start rotating in the spare to even out wear? I'm concerned about uneven tire diameters and unnecessary wear on the driveline and differentials. Would appreciate your thoughts.
#2
Do these miniscule numbers really matter with concern of the driveline and differentials? Guessing not.
#3
driveline and diff will be fine, my only concern would be wet weather grip due to how i drive
Thread
Thread Starter
Forum
Replies
Last Post
scooterdog
GX - 1st Gen (2004-2009)
10
11-28-13 05:58 PM