Originally Posted by OwnerGX460
You had very nice posts.
Do you know how to disassemble Front Center Cupholder on 2010 GX460?
I have some stuff (credit card and other thin stuff) dropped into cupholder (underneath cupholder lid). Dealer said take at least $200+ for the job. Great appreciated if anybody here can show some pictures. Thanks advance.
I don't have my GX anymore, but will try to describe without pictures.
1.) Engage hand break (actually kick it in with your foot).
2.) Shift the car to N and turn off the engine. Necessary as you will not be able to remove center console with the truck in P.
3.) Remove shift **** (unscrew it) - may take initial force
4.) remove sides to your center console (leather pieces on each side). There are no screws, those just pop in. start from rear toward the front.
5.) Lift up from rear the whole center console (by the storage compartmnt between front seats)
6.) while lifting up the center console, pull the console toward rear of the truck. It hooks in front. When putting back, you will need to push in first before droping the center console down.
7.) Unplug all the cables to switches, etc and you have center console out and you should be able to get everything out without any problem.
The whole process takes no more than 10 minutes and I don't remember using any tools to remove it.