How to remove/reset error code on a 2007 GX470 tire pressure monitoring system
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2015
Location: IL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How to remove/reset error code on a 2007 GX470 tire pressure monitoring system
Can somebody provide some guidance on how to reset and remove the error code on the tire pressure monitoring system?
Thank you in advance for your assistance.
Technobuff
Thank you in advance for your assistance.
Technobuff
#2
First, I would check the selector switch under the driver's side dash and ensure that is is on the Main setting. If the TPMS light is flashing, it usually means a battery in one of the sensors has died. To diagnose, you can take it to a tire shop, or use Techstream to see the sensor temperature and pressure for all 5 sensors.
#3
Pole Position
Yes, check the TPMS selection switch, then check the pressures (go by the door sticker, +/- 2psi). Don't forget to check the spare!!
If you add/remove air, drive the vehicle for 10 miles or so to see if the light still stays on. If it's still on, probably a dead battery in one of the sensors.
Chip H.
If you add/remove air, drive the vehicle for 10 miles or so to see if the light still stays on. If it's still on, probably a dead battery in one of the sensors.
Chip H.
#5
Pole Position
It lets you have a set of snow tires with their own set of TPMS sensors.
Chip H.
Chip H.
Thread
Thread Starter
Forum
Replies
Last Post
wmklogan
IS - 2nd Gen (2006-2013)
5
08-25-18 11:03 AM