brake controller
05-15-15, 07:16 AM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2015
Location: nc
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
brake controller
2007 gx 470--I have a seven pin outlet and 6500 pound hitch in the back but suspect I need to install a brake controller to run the electric brakes . Anyone have any recommendations on brand or just get U haul to install? The local lexus dealer can't/won't help
05-15-15, 07:22 AM
#2
Forum Administrator
iTrader: (2)
Yes you'll need one
https://www.clublexus.com/forums/gx-...ake+controller
Other threads that might help
https://www.clublexus.com/forums/gx-...ake+controller
https://www.clublexus.com/forums/gx-...ake+controller
I've got a Tekonsha Prodigy in my Tundra for towing (would recommend) but don't know how it'd fit in spaces in the GX.
http://www.tekonsha.com/products/bra...s6vqgsUyhEAAA1
https://www.clublexus.com/forums/gx-...ake+controller
Other threads that might help
https://www.clublexus.com/forums/gx-...ake+controller
https://www.clublexus.com/forums/gx-...ake+controller
I've got a Tekonsha Prodigy in my Tundra for towing (would recommend) but don't know how it'd fit in spaces in the GX.
http://www.tekonsha.com/products/bra...s6vqgsUyhEAAA1
05-27-15, 10:13 AM
#4
Rookie
Join Date: Feb 2014
Location: Illinois
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I also have the Tekonsha. If you buy the Toyota/Lexus cable as an option, it plugs right into a plug near the steering column. You can find the plug by removing the finish panel above the pedals. It is wrapped in blue tape, wrapped to the steering column, I believe. Then just drill 2 small holes in the dash to attach the controller. All pretty easy to do and no need to pay someone.
Thread
Thread Starter
Forum
Replies
Last Post
