Push Pins for front bumper and under hood plastics
03-31-15, 10:47 AM
#1
Push Pins for front bumper and under hood plastics
Guys,
Removed my front bumper and some of the push pins broke. I'm also missing some from under the hood for the plastics covering the motor. Does anyone have the part number for these? Or has anyone picked them up at their local auto parts store? Thanks,
Jonny
Removed my front bumper and some of the push pins broke. I'm also missing some from under the hood for the plastics covering the motor. Does anyone have the part number for these? Or has anyone picked them up at their local auto parts store? Thanks,
Jonny
03-31-15, 11:02 AM
#2
Pole Position
I have a mix of OEM and aftermarket, I'm honestly tempted to pull all the plastic covers off and stick them in the attic for when I eventually go to sell this truck, all they do is get in the way when you do your own service.
03-31-15, 11:15 AM
#4
Pole Position
Amazon carries a box of 25 for $7, which is a huge savings over buying them at the dealer.
Member Dx3 says these don't fit.
The part is #13, which I found here:
https://www.mylparts.com/parts/2004/...iagram=8940025
Chip H.
Member Dx3 says these don't fit.
The part is #13, which I found here:
https://www.mylparts.com/parts/2004/...iagram=8940025
Chip H.
Last edited by chiph9; 06-23-15 at 09:56 AM.
03-31-15, 12:59 PM
#5
that is great info mine is missing like evry other one. I removed the left plastic around the airbox completely and kept the right one and engine cover on, still looks good.
the one in the front is a pain, probably encountered it when you did the HID's I know I did.
the one in the front is a pain, probably encountered it when you did the HID's I know I did.
04-01-15, 08:17 AM
#7
Driver School Candidate
Join Date: Aug 2011
Location: Nebraska
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Maybe its my imagination, but I have driven around without any of the plastic underhood shielding and I seemed to notice more engine noise. Maybe all that plastic helps keep things quiet.
Trending Topics
04-01-15, 01:31 PM
#8
04-02-15, 07:11 AM
#9
Amazon carries a box of 25 for $7, which is a huge savings over buying them at the dealer.
Amazon.com: 7mm Hole, 20mm Head, 8mm Stem Toyota Push In Rivet (Qty: 25) Gripper Box # 2146T: Automotive
The part is #13, which I found here:
https://www.mylparts.com/parts/2004/...iagram=8940025
Chip H.
Amazon.com: 7mm Hole, 20mm Head, 8mm Stem Toyota Push In Rivet (Qty: 25) Gripper Box # 2146T: Automotive
The part is #13, which I found here:
https://www.mylparts.com/parts/2004/...iagram=8940025
Chip H.
06-15-15, 10:03 AM
#11
Engine cover pins
Anyone seen or done any modifications on these pins, do they make a twist lock version?
I am tired of chasing these pins around when I push them in and they pop out from underneath....
I am tired of chasing these pins around when I push them in and they pop out from underneath....
Last edited by bhesse; 06-15-15 at 08:46 PM.
06-16-15, 04:54 AM
#14
I use the ones like item# 451425. Easy to remove with a plastic trim tool or just grab with needle nose pliers and remove. They are in the fastener section at Lowes. look for the automotive fasteners drawers.
http://www.lowes.com/Search=automoti...ive+fasteners#!
http://www.lowes.com/Search=automoti...ive+fasteners#!
