Any interest for GX470 offroad parts?
06-26-12, 04:59 PM
#1
Former Sponsor
Thread Starter
Join Date: May 2012
Location: Louisiana
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Any interest for GX470 offroad parts?
Is there any interest on this board to use the GX470 for more than just a grocery getter? I've been designing a steel plate winch bumper for the front and am inclined to start production if there were enough people interested. A rear bumper w/ tire carrier is in the works too.
It seems that the folks on this board are more interested in city type things but I've seen a few guys carve your trucks up to make 4runner parts fit. This bumper would be full bolt on without modifying the body of the truck at all. I imagine this problem of cutting the truck fenders is what turns a lot of people off and I hope I can introduce a few more people to the great outdoors by ensuring your truck stays a lexus and not a frankenstein that cant easily be put back to stock.
Come on guys! It's time to use your truck to their full potential, not to mention look mean as hell! Let me hear from you.
It seems that the folks on this board are more interested in city type things but I've seen a few guys carve your trucks up to make 4runner parts fit. This bumper would be full bolt on without modifying the body of the truck at all. I imagine this problem of cutting the truck fenders is what turns a lot of people off and I hope I can introduce a few more people to the great outdoors by ensuring your truck stays a lexus and not a frankenstein that cant easily be put back to stock.
Come on guys! It's time to use your truck to their full potential, not to mention look mean as hell! Let me hear from you.
06-27-12, 05:47 AM
#3
Former Sponsor
Thread Starter
Join Date: May 2012
Location: Louisiana
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
We are currently welding up the prototype now. I hope to have the design finalized within the next couple of weeks. I'll definitely post pics and driver impressions, the staunchest one, my wife.
I can pretty much guarantee that if she doesn't complain about wind noise or whistling, no one will.
06-27-12, 08:28 AM
#6
Check out toyota120.com This is what some of those guys are doing...
http://www.flickr.com/photos/81079456@N03/7454966622/ This one I want!
http://www.flickr.com/photos/81079456@N03/7454966442/
http://www.flickr.com/photos/81079456@N03/7454966346/
http://www.flickr.com/photos/81079456@N03/7454966622/ This one I want!
http://www.flickr.com/photos/81079456@N03/7454966442/
http://www.flickr.com/photos/81079456@N03/7454966346/
Last edited by MSGX470; 06-27-12 at 08:31 AM.
Trending Topics
06-27-12, 09:12 AM
#10
Former Sponsor
Thread Starter
Join Date: May 2012
Location: Louisiana
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I have seen the ARB bumpers retrofitted onto the GX, but it requires modification to the fenders and other locations. Not to mention they cost north of 1400 dollars, although I'm sure the robot welding and grinding and all are quite nice.
Those large companies have massive amounts of overhead, but I have a feeling that there is still room in the market for a much less expensive bumper that fits well and does everything you'd expect it to.
I aim to fill that void for this niche market and have the capability for customization to the individual level. Give me just a little time, to get this prototype finished up and we can go from there.
Like I've alluded to before, my wife owns the GX, and she's a little country, so I'll be making a single bumper regardless. Hopefully, we can please others that are looking for a less expensive option that still looks good and performs great. Also, because the 4runner and GX share the same frame, it isnt too inconceivable to have different "skins" that bolt onto the same winch mount platform that would allow for a modular approach to creating armor for both the GX and 4runner, which would significantly increase the potential customer base.
I've been preparing my company for some time, so I'm not going to make claims and just disappear without results. I'm stubborn that way
. Southern Style Speed, LLC is also the designer of the first hood sealed intake that produces nearly 9whp for the IS and GS Lexus models and we are still pursuing funding to get that venture off the ground.
I look forward to serving you in the future!!
Those large companies have massive amounts of overhead, but I have a feeling that there is still room in the market for a much less expensive bumper that fits well and does everything you'd expect it to.
I aim to fill that void for this niche market and have the capability for customization to the individual level. Give me just a little time, to get this prototype finished up and we can go from there.
Like I've alluded to before, my wife owns the GX, and she's a little country, so I'll be making a single bumper regardless. Hopefully, we can please others that are looking for a less expensive option that still looks good and performs great. Also, because the 4runner and GX share the same frame, it isnt too inconceivable to have different "skins" that bolt onto the same winch mount platform that would allow for a modular approach to creating armor for both the GX and 4runner, which would significantly increase the potential customer base.
I've been preparing my company for some time, so I'm not going to make claims and just disappear without results. I'm stubborn that way
. Southern Style Speed, LLC is also the designer of the first hood sealed intake that produces nearly 9whp for the IS and GS Lexus models and we are still pursuing funding to get that venture off the ground. I look forward to serving you in the future!!
Last edited by SouthernSS; 06-27-12 at 09:23 AM.
06-27-12, 11:45 AM
#12
Former Sponsor
Thread Starter
Join Date: May 2012
Location: Louisiana
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Hey jack, form follows function...or is it the other way around? chicken or the egg? In any case, looking good is just as important in my book as performing well, and all of my products do both!!
06-27-12, 02:37 PM
#15
Former Sponsor
Thread Starter
Join Date: May 2012
Location: Louisiana
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
we can get some skids together too, but I need to focus on this front bumper for now. Keep the suggestions coming!
Last edited by SouthernSS; 06-27-12 at 02:45 PM.