12-15-14, 04:03 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Exterior Guides
- Why Won't My Power Windows Go Up After Disconnecting Battery?
Guide to diagnose trouble and recommended solutions
- Why is My Power Window Not Working?
Guide to diagnose trouble and recommended solutions
Browse all: Exterior Guides
Replaced battery now Power Windows don't work
12-16-13, 10:37 AM
#16
Driver School Candidate
Join Date: Dec 2013
Location: Virginia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
My battery was replaced today, when I got to work I tried to lower my window and it didn't work. Tried the others, same thing. So happy to have found this website. Haven't gone back to my car yet, but have no doubt this will solve the problem. Thank you!
12-16-13, 11:38 AM
#17
Lexus Champion
It's amazing what you will find in your owners manual. 
And for those that don't have one, you can view it here:
https://secure.drivers.lexus.com/lexusdrivers/home.do
And for those that don't have one, you can view it here:
https://secure.drivers.lexus.com/lexusdrivers/home.do
03-07-14, 05:00 PM
#18
Driver School Candidate
It's amazing what you will find in your owners manual.
And for those that don't have one, you can view it here:
https://secure.drivers.lexus.com/lexusdrivers/home.do
And for those that don't have one, you can view it here:
https://secure.drivers.lexus.com/lexusdrivers/home.do
In the above directions^^^^^ they indicate to lower the window "half way" then hold the button down....I mistakenly lowered the rear passenger window ALL THE WAY DOWN. Now it seems to be stuck. I can't get that window to normalize now and have tried numerous times to no avail. It's the only one that won't work.
Any help is appreciated
03-07-14, 05:45 PM
#20
Lexus Champion
When attempting to "normalize" my windows after I replace my dead battery.... I was able to get each window back working except for one window........ the rear passenger side window.
In the above directions^^^^^ they indicate to lower the window "half way" then hold the button down....I mistakenly lowered the rear passenger window ALL THE WAY DOWN. Now it seems to be stuck. I can't get that window to normalize now and have tried numerous times to no avail. It's the only one that won't work.
Any help is appreciated
In the above directions^^^^^ they indicate to lower the window "half way" then hold the button down....I mistakenly lowered the rear passenger window ALL THE WAY DOWN. Now it seems to be stuck. I can't get that window to normalize now and have tried numerous times to no avail. It's the only one that won't work.
Any help is appreciated
Lower the window, keep the switched pushed down for 3-4 seconds after the window lowers all the way...then raise the windows and keep the switch pulled up for 2 seconds. That's it....
03-08-14, 08:23 AM
#21
Driver School Candidate
I took the vehicle to Lexus...found out I need a switch assembly.
They were able to get the window up for me though as I declined the fix from them.
The part (8403060032) costs $239 from Lexus.
To save some cash decided to go another route to get the part for much cheaper.
03-08-14, 11:05 AM
#22
As repeated "normalization" of the one rear passenger window wasn't working.
I took the vehicle to Lexus...found out I need a switch assembly.
They were able to get the window up for me though as I declined the fix from them.
The part (8403060032) costs $239 from Lexus.
To save some cash decided to go another route to get the part for much cheaper.
I took the vehicle to Lexus...found out I need a switch assembly.
They were able to get the window up for me though as I declined the fix from them.
The part (8403060032) costs $239 from Lexus.
To save some cash decided to go another route to get the part for much cheaper.
03-09-14, 07:24 AM
#23
Driver School Candidate
The window switch assemble is actually serviceable if you remove it you can carefully open it and clean the contacts. Its most likely dirt or moisture got in there and corroded the contacts. You could also spray some contact cleaner [ radio shack ] on the top of the switch and it might be able to wick down and clean it without taking it apart.
I will run this method by my trusted mechanic and see if this can solve my problem.
09-19-14, 08:42 AM
#26
Pole Position
http://www.gates.com/~/media/Files/G...ementGuide.pdf
Chip H.
09-23-14, 07:12 AM
#27
Driver School Candidate
Join Date: Sep 2005
Location: CA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Have you changed the timing belt yet? There's a time limit as well as the mileage limit on them.
http://www.gates.com/~/media/Files/G...ementGuide.pdf
Chip H.
http://www.gates.com/~/media/Files/G...ementGuide.pdf
Chip H.
So far I changed the battery and tire pressure sensor(out of battery).
09-23-14, 07:13 AM
#28
Driver School Candidate
Join Date: Sep 2005
Location: CA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
10-15-14, 06:32 AM
#30
Driver School Candidate
Join Date: Oct 2014
Location: ma
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
thanks
Confirmed!
This method did the trick. I did the following:
1. Pressed the START button twice to put the car in the on the ON position (radio on)
2. Went to passenger side pressed and HELD the control button till the window was 100% down, then pressed and HELD till window is 100% up
3. Went back to Driver Master Control and tested.
4. Repeated steps 2 & 3 for rear windows individually
Good luck peeps!
This method did the trick. I did the following:
1. Pressed the START button twice to put the car in the on the ON position (radio on)
2. Went to passenger side pressed and HELD the control button till the window was 100% down, then pressed and HELD till window is 100% up
3. Went back to Driver Master Control and tested.
4. Repeated steps 2 & 3 for rear windows individually
Good luck peeps!