tein s spec springs.
#1
Pit Crew
Thread Starter
tein s spec springs.
So I wanted to lower my 07 gs350 and I seen that the tanabe nf210 is popular but the car seems to be sitting very high to me. So after some research seen that the tein drops a little bit more than the tanabe. Does any one have experience or photos of either or. And also with the tein drop of 1.4f and 1.1r would I be looking at a lot of super slow bump action lol.
#2
Pole Position
iTrader: (1)
Join Date: Aug 2014
Location: SoCal, Northridge 818,310,323,626
Posts: 302
Likes: 0
Received 4 Likes
on
4 Posts
I'm on DF210s with 2" all around... Perfect over certain speed bumps, thinking about putting it up for sale. Kinda wanna go even more lower. Haha.
Had the S-tech springs on my last ride G35 coupe and it was slightly harsh imo. These are more oem but 20% more stiffer to prevent itself from bottoming out. The NF210s are more for comfort but with a mild drop as you've mentioned in your post. Hope that helps.
Had the S-tech springs on my last ride G35 coupe and it was slightly harsh imo. These are more oem but 20% more stiffer to prevent itself from bottoming out. The NF210s are more for comfort but with a mild drop as you've mentioned in your post. Hope that helps.
Last edited by LoveThatV8; 01-26-15 at 09:28 PM.
#4
Pole Position
iTrader: (1)
Join Date: Aug 2014
Location: SoCal, Northridge 818,310,323,626
Posts: 302
Likes: 0
Received 4 Likes
on
4 Posts
As I've said my man... "Thinking" about it, keeping them atm and if ever I do decide, it'll be up on the classified section. Till now, focusing more on purchasing a CF hood or HKS exhaust. I posted earlier on experiences of springs you've mentioned earlier.
Thread
Thread Starter
Forum
Replies
Last Post