verly6565

if your going to spend that kind of money might aswell get an gs460 on trade in

YaMomma

Be careful buying intakes for an 06GS300, that's what I have and the GS300 and GS350 intakes are different. Since the 2006 engine was only made for a year there aren't a lot of options. There use to be a few out there but DC is the only company that still makes a cold air intake for an 06. At this point K&N's cold air intake is rare because they stopped making it for the 06 a long time ago. Fujita is rare but I doubt you will find one. Even if you do be careful because the early models caused error codes. Scratch joez off your list because that will not fit a 300. The following site may have some rare parts but I think everything on there site is overpriced.

http://l-tunedparts.com/index.php

They make a ton of F Sport stuff for the 350.

http://lexus.sewellparts.com/accesso...S350-2008.html

bluespidey

iTrader: (1)

[QUOTE=YaMomma;8487714]Be careful buying intakes for an 06GS300, that's what I have and the GS300 and GS350 intakes are different. Since the 2006 engine was only made for a year there aren't a lot of options. There use to be a few out there but DC is the only company that still makes a cold air intake for an 06. At this point K&N's cold air intake is rare because they stopped making it for the 06 a long time ago. Fujita is rare but I doubt you will find one. Even if you do be careful because the early models caused error codes. Scratch joez off your list because that will not fit a 300. The following site may have some rare parts but I think everything on there site is overpriced.

http://l-tunedparts.com/index.php


good to know! do you know if the 2GIS f sport intake will fit on the 3GS300?

YaMomma

I don't know for sure either way but i doubt it. There aren't any F-Sport intake products that work for an 06 to my knowledge. I ordered the F-Sport air filter from my Lexus dealer but it didn't fit my 06. It came up as the right part because I guess there are some 06 350's out there.

RedlexGs

uberEj nice link!

uberEJ

iTrader: (2)

I don't know too much about the 3gs but I do know enough to get me around. just make sure when you order parts that it will fit. I haven't seen much parts for the 06 3gs and never could figure out way

just IMO, if I can't fully fabricate the part I want, ill buy a similar part with close measurements and just mod it to where it will work and fit properly.

thanks but I took it from another thread here on the forum.