When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I only found a couple pictures and they are of one car.
Albeit a GS450h somewhere in Europe, still a 3gs nonetheless Anybody have any info on this car, or know if the owner is on this forum?
Aussie car
This is Rhino Rack..my friend (Who originally owned my 3GS) works for them..and designed them for the GS and got them made..so that being said when I bought the car off him..it came with a set
Change to Whispbar. It's more flush and low profile looking than the Yakima Q-tower. Don't mind the cargo box. I use it to carry my gear and barrett 50 cal. I also find it useful for carrying other stuff too. Sorry for bad phone pics. I'll take better pics and without the cargo box later.
I couldn't find any rack for the GS only from Europe Lexus for the OEM one but I remember I was quoted 1500 shipped. I found the inno rack that worked and I never had problems with it. Might be taking it off cause I am gonna wrap the whole car now.
Just thought I'd share some pics of the hitch I just installed on my '08 GS350. I really dislike the fact that I can see it but it gets the job done. I installed the Curt C11372 1-1/4" class 1 hitch. Great hardware and fairly easy install.
I have one installed on my car also. What I dislike about it is that the center receiver will scrape slightly steep driveways even without any rack attached to it.
I have one installed on my car also. What I dislike about it is that the center receiver will scrape slightly steep driveways even without any rack attached to it.
Ditto, it sounds really scary and I can't believe that the clearance is so little that the rack (which is just a tiny bit lower than the muffler) scrapes while the muffler does not.
I need to find a bike rack that comes up near the bumper as short as possible because the longer they are at the hitch the more length there is to scrape.
In the video they don't cut back the heat shield however in the instructions they tell you to. I didn't cut them back and it seems like there are no issues whatsoever.
Ditto, it sounds really scary and I can't believe that the clearance is so little that the rack (which is just a tiny bit lower than the muffler) scrapes while the muffler does not.
I need to find a bike rack that comes up near the bumper as short as possible because the longer they are at the hitch the more length there is to scrape.
Couldn't agree more. No fun to hear the hitch scrape - I've already done it once!
In the video they don't cut back the heat shield however in the instructions they tell you to. I didn't cut them back and it seems like there are no issues whatsoever.
I just got one in the mail last week. Have not installed it. What model bike rack is that? is it installed with a nut and bolt or is it tighten with the **** on bottom? I have been trying to find one that can be easily removed (no nut and bolt).
11-11-14, 07:43 PM
_sedan_02.jpg)
