GS - 3rd Gen (2006-2011) Discussion about the 2006+ model GS300, GS350, GS430, GS450H and GS460

Can you adjust the screenwash nozzle aim?

Thread Tools
 
Search this Thread
 
Old 01-10-14, 06:52 AM
  #1  
d6lc
Driver School Candidate
Thread Starter
 
d6lc's Avatar
 
Join Date: Feb 2013
Location: MN
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default Can you adjust the screenwash nozzle aim?

Can you adjust the screen washer jets on a 450h?, one of mine is set too high and just leave the lower edge smeared. I looked at the washed and they don’t seem like the normal type that you can adjust with a pin.
Old 01-10-14, 09:09 PM
  #2  
GS350Lexus
Lexus Champion
iTrader: (5)
 
GS350Lexus's Avatar
 
Join Date: Aug 2009
Location: NY
Posts: 2,741
Received 2 Likes on 2 Posts
Default

You are not spraying enough!!!!!!!!!
Old 01-11-14, 12:05 AM
  #3  
worker
Lexus Champion
 
worker's Avatar
 
Join Date: Aug 2009
Location: of insanity
Posts: 2,080
Likes: 0
Received 6 Likes on 6 Posts
Default

I never like the spray pattern on our car. I agree it's a bit too high. But I guess they expect the head wind to bring the spray back in.

Would be nice to get it a bit lower and let the wiper blade push the water out. I always find it helpful to spray sitting still, at redlight or during the bit of time the car is warming up. If you spray only a tiny bit, it won't activate the wiper and let the water run down. Than do a full spray.

I also prefer my headlight off so not to activate the headlight spray too. That thing splash everywhere.

Another thing, roll the window up. That spray water can plash into the car with window down. I love to roll down the window especially in summer. But gotta spray before rolling down the window.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
richard203
Automotive Care & Detailing
21
01-16-20 06:15 PM
Kwik8276
IS - 3rd Gen (2014-present)
36
05-22-14 03:58 PM
sicwhip
SC- 1st Gen (1992-2000)
18
11-02-10 10:38 AM
monkiwrnch
GS - 1st Gen (1993-1997)
2
11-04-07 09:01 PM
Tymboo
SC- 1st Gen (1992-2000)
2
03-29-06 07:06 PM



Quick Reply: Can you adjust the screenwash nozzle aim?



All times are GMT -7. The time now is 10:19 AM.