GS - 3rd Gen (2006-2011) Discussion about the 2006+ model GS300, GS350, GS430, GS450H and GS460

VSC error after changing headlight bulbs

Thread Tools
 
Search this Thread
 
Old 11-05-13, 06:43 AM
  #1  
cynn68
Driver School Candidate
Thread Starter
 
cynn68's Avatar
 
Join Date: Nov 2013
Location: Texas
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default VSC error after changing headlight bulbs

I have a 2007 GS 430, 126,000 miles. Initially I had one faulty headlight that would not work but after turning the switch off/on, it would work again. Eventually both headlights started malfunctioning. After reading other forums, we elected to change the headlight bulbs. So far that has worked. However, after changing the bulbs, the VSC (Vehicle Stability Control) and check engine lights came on. After running the headlights and using the car to go to/from work with about 4 stops and restarts, the car reset itself and the warning lights turned off. Scared me at first because I had also just had suspension work done. However, the Headlamp Level Control System is part of the VSC system, which makes sense, just wasn't prepared for the warning lights.
Old 11-05-13, 01:40 PM
  #2  
alongcor24
Driver School Candidate
iTrader: (1)
 
alongcor24's Avatar
 
Join Date: Apr 2010
Location: TX
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

I had a check VSC warning light come on. After searching, i replaced my gas cap. It went away after around 50 miles.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdc916
IS - 2nd Gen (2006-2013)
3
02-22-19 11:03 AM
user 528962307
GS - 3rd Gen (2006-2011)
3
08-21-15 08:19 PM
wiredGS400
IS F (2008-2014)
4
12-02-13 08:59 AM
scrim67
Maintenance
2
10-29-04 01:10 PM



Quick Reply: VSC error after changing headlight bulbs



All times are GMT -7. The time now is 04:38 PM.