Go Back   Club Lexus Forums > Lexus Model Forums > GS Models > GS - Third Generation
Sign in using an external account
Register Forgot Password?

Parking sensor went bad.

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 04-19-13, 07:37 AM   #1
tbilisi79
Lead Lap
Trader Score: (0)
 
tbilisi79's Avatar
 
Join Date: Nov 2006
Location: NY
Posts: 638
Default Parking sensor went bad.

For some reason the front sensor was freaking out ever since I bought the car...most of the times it worked, but now it always shows and obstacle.
Any way to fix them? I found new one in my color for $180 or used anywhere from 50-100. But the color is different. Can I pop the cap from and old one so the color on the used one is the same or must I have it painted. I can install it myself.

I dont care for the sensors but it does make my wifes life easier.

Thank you
This ad is not displayed to registered members.
Register your free account today and become a member on Club Lexus!
__________________
92 Lincoln Mark VII LSC
06 Lexus GS430.
tbilisi79 is offline   Reply With Quote
Old 04-19-13, 07:47 AM   #2
ibidu1
Lexus Test Driver
Trader Score: (1)
 
Join Date: Mar 2012
Location: FL
Posts: 1,567
Default

Mine does the same after I wash the car or it rains. Have you tried cleaning them and possibly waxing them
ibidu1 is offline   Reply With Quote
Old 04-19-13, 08:40 AM   #3
tbilisi79
Lead Lap
Trader Score: (0)
 
tbilisi79's Avatar
 
Join Date: Nov 2006
Location: NY
Posts: 638
Default

I washed my car numerous times... Sometimes it comes back but not for long. Says clean sonar and then goes nuts.
Waxing??
__________________
92 Lincoln Mark VII LSC
06 Lexus GS430.
tbilisi79 is offline   Reply With Quote
Old 07-24-13, 04:56 PM   #4
DrexLex
Pole Position
Trader Score: (0)
 
Join Date: Jan 2005
Location: OR
Posts: 392
Default

If the sensor is faulty, there is no way to repair it. I opened a defective one from my car and it is potted with some sort of white goop, like a sort of silicone.

I ordered the replacement from LexusParts, then noticed I ordered the wrong one! There's 3 different units used on the GS: 4 rectangular ones up front, and 2 each of different diameter round ones on the rear. Just be careful to get the right unit in the right color.
__________________
06 GS430 - Blk/Ash - ML/NAV - Vaistech SLI/iPod - Kicker ZX450.2 tuned sub
DrexLex is offline   Reply With Quote
Old 07-26-13, 08:52 AM   #5
BinaryJay
Lexus Champion
Trader Score: (0)
 
Join Date: Oct 2009
Location: Toronto
Posts: 2,953
Default

I've had my rear ones freak out for no reason, but every time so far... thankfully... it was resolved by thoroughly washing them and/or giving them a few good taps. I think they particularly don't like when crud builds up in the little lip between the sensor and the rubber o-ring type part.
__________________
http://i42.tinypic.com/30mmpe1.jpg
BinaryJay is offline   Reply With Quote
Old 07-26-13, 09:15 AM   #6
XxGoKoUxX
Lexus Champion
Trader Score: (0)
 
XxGoKoUxX's Avatar
 
Join Date: Jul 2009
Location: FL
Posts: 2,869
Send a message via AIM to XxGoKoUxX Send a message via MSN to XxGoKoUxX Send a message via Yahoo to XxGoKoUxX
Default

You sound just like me DrexLex..... I'm always curious as to how things work, so I take almost everything I own apart..... Unless I know for a fact it is an impossible to reassemble project of course.
XxGoKoUxX is offline   Reply With Quote
Old 07-28-13, 11:05 AM   #7
pdbrady
Driver School Candidate
Trader Score: (0)
 
Join Date: Feb 2013
Location: MO
Posts: 18
Default

I had a right rear do the same thing, went crazy every time I went into reverse. Cleaning it never phased it. I just dropped that side of the bumper, unhooked the sensor and cleaned the connections a bit, and put it back in. Hasn't had another issue since.
pdbrady is offline   Reply With Quote
Old 07-28-13, 12:39 PM   #8
DrexLex
Pole Position
Trader Score: (0)
 
Join Date: Jan 2005
Location: OR
Posts: 392
Default

Quote:
Originally Posted by pdbrady View Post
I had a right rear do the same thing, went crazy every time I went into reverse. Cleaning it never phased it. I just dropped that side of the bumper, unhooked the sensor and cleaned the connections a bit, and put it back in. Hasn't had another issue since.
Very good advice. I really should have tried that first! Usually, that's what I do. But curiosity got the best of me, and by opening the unit, it created a "there's no going back" scenario.
__________________
06 GS430 - Blk/Ash - ML/NAV - Vaistech SLI/iPod - Kicker ZX450.2 tuned sub
DrexLex is offline   Reply With Quote
Old 07-29-13, 06:43 PM   #9
pdbrady
Driver School Candidate
Trader Score: (0)
 
Join Date: Feb 2013
Location: MO
Posts: 18
Default

Haha, trust me I've been there. I usually try to gauge price first, but sometimes I just dig right in. I've just learned with electrical to always check connections before opening things up.
pdbrady is offline   Reply With Quote
Old 07-29-13, 07:51 PM   #10
ibidu1
Lexus Test Driver
Trader Score: (1)
 
Join Date: Mar 2012
Location: FL
Posts: 1,567
Default

Should have put some di-electrical grease on the connections. I need to do this to mine, I always thought the sensor would get soaked internal. I will try to reach into my front bumper and see if I can get to the plugs instead of pulling off the bumper.
ibidu1 is offline   Reply With Quote
Old 08-06-13, 06:27 PM   #11
1sWt2GS
Lexus Fanatic
Trader Score: (5)
 
1sWt2GS's Avatar
 
Join Date: Dec 2010
Location: soCAL
Posts: 6,176
Default

I wish we had parking sensors, I was in a 3GS recently and its so cool!

Guess it doesn't help people backing into you though.
__________________
2002 Millennium Silver Metallic Sport Design

All Stock

If you got a speeding ticket... You're not low enough.

// \\ All SHOW no GO
1sWt2GS is offline   Reply With Quote
Old 08-08-13, 10:21 AM   #12
BinaryJay
Lexus Champion
Trader Score: (0)
 
Join Date: Oct 2009
Location: Toronto
Posts: 2,953
Default

Quote:
Originally Posted by ibidu1 View Post
Should have put some di-electrical grease on the connections. I need to do this to mine, I always thought the sensor would get soaked internal. I will try to reach into my front bumper and see if I can get to the plugs instead of pulling off the bumper.
Why would you want to put an insulating grease onto a low voltage electrical connection? Might as well fill the connector up with mud.
__________________
http://i42.tinypic.com/30mmpe1.jpg
BinaryJay is offline   Reply With Quote
Old 05-28-14, 04:08 PM   #13
tbilisi79
Lead Lap
Trader Score: (0)
 
tbilisi79's Avatar
 
Join Date: Nov 2006
Location: NY
Posts: 638
Default

A bit of an update.
During the winter the sensor worked most of the time. When it got warmer it started acting up again.
Took the car out today in 60 degree weather and it's working fine again. Car sat still for 3 days.

Any clues? If the sensor was bad wouldn't it be bad all the time?
One of the sensors up front that I suspect is giving me problems has a small dent, as if a small rock hit it. It's tiny , but I'm assuming that's what the problem is, but wouldn't that problem always be there ?
__________________
92 Lincoln Mark VII LSC
06 Lexus GS430.
tbilisi79 is offline   Reply With Quote
Old 05-29-14, 11:30 PM   #14
DrexLex
Pole Position
Trader Score: (0)
 
Join Date: Jan 2005
Location: OR
Posts: 392
Default

Quote:
Originally Posted by tbilisi79 View Post
Any clues? If the sensor was bad wouldn't it be bad all the time?
The sensor has an outer ring, which is the housing flang, and an inner disc, separated by a thin space. That space is filled with some rubbery compound. Try scrubbing that rubber gap with a cloth to make sure there's no layer of buildup or other stuff on it. I cannot remember if I just used a damp cloth or something else, but it stopped my flaky sensor.
__________________
06 GS430 - Blk/Ash - ML/NAV - Vaistech SLI/iPod - Kicker ZX450.2 tuned sub
DrexLex is offline   Reply With Quote
Old 06-02-14, 03:48 PM   #15
msequence
Driver School Candidate
Trader Score: (0)
 
Join Date: Oct 2012
Location: ontario
Posts: 39
Default

Quote:
Originally Posted by DrexLex View Post
The sensor has an outer ring, which is the housing flang, and an inner disc, separated by a thin space. That space is filled with some rubbery compound. Try scrubbing that rubber gap with a cloth to make sure there's no layer of buildup or other stuff on it. I cannot remember if I just used a damp cloth or something else, but it stopped my flaky sensor.
Interesting piece of advice. Thank you.
msequence is offline   Reply With Quote
Old 06-02-14, 03:48 PM
 
 
 
 
Reply

Tags
back, bad, lexus, park, parking, pop, sensor

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to disable tire-pressure monitoring (TPM) system? Hans Wang SC 430 189 06-08-14 04:56 AM
Tire pressure sensor for 245-35-20 Monique023 IS - Second Generation 5 05-07-14 06:21 AM
IL FS: Used OEM TPMS Sensors chi123 2Gen IS250 / IS350 / IS-F Classifieds (06-13) 5 11-22-13 03:18 PM
IA O2 Sensors, Radio/Console trim, & interior parts SpadedOne SC400 / 300 Classifieds 19 07-23-13 01:37 PM
P1133 A/F Sensor or O2 Sensor SMUChris ES300 and ES330 2 12-17-12 03:50 AM

All times are GMT -7. The time now is 04:53 AM.

Join ClubLexus
Advertising


Copyright © 2000-2008 Internet Brands, Inc. All Rights Reserved
Privacy Policy | Disclaimer | Terms of Use | JOBS


Get all contact info